Reel Bar Weld II (19 Tines, 2290 mm) for FM WORLD 4LZ-6.0P
The second 2290 mm welded reel bar in the W3.5D set, carrying 19 tines and weighing 9 kg. It pairs with the 18-tine long bar on the wider header.
Bar specification
| Part number | W3.5D-01D-01-05-15-00 |
| Part type | Welded reel bar (position II) |
| Bar length | 2290 mm |
| Tines | 19 |
| Tooth length | 240 mm |
| Weight | 9 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
The second long bar
Fitted in the next position, this bar follows the first long bar through the standing crop. The 19 tines keep the sweep dense across the full 2290 mm width.
19 tines as the identifier
The 19-tine count is the clearest difference from the 18-tine position-I bar, and the -15 ending confirms the position. Both share the 2290 mm length, so count the tines rather than measuring only.
Mounting
Seat the bar on the reel arms without forcing it and tighten evenly, then verify all 19 tines are firm. A slow hand turn should show even clearance end to end.
Re-check the fixings after the first short run, since a long bar will show any misalignment quickly as vibration.
Why it is changed
- Bending after impact
- Cracked end welds
- Enlarged tine holes and leaning tines
- Vibration from imbalance
- Centre sag or contact
- Clamps that will not stay tight
At the quote stage
Mounting: W3.5D header reel on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Provide the part number and confirm 19 tines and the 2290 mm length when ordering.
Dimensions to match: Check 2290 mm length, 19 tines and mounting centres against the old bar.
The W3.5D bar pair
Common buyer questions
Can the 18-tine long bar replace this one?
No, the position requires 19 tines and the part numbers differ even though both are 2290 mm.
How do I confirm I have the right long bar?
Count the tines: 19 here against 18 on position I, and match the part-number ending.
Identification of W3.5D-01D-01-05-15-00 before ordering
Order this 19-tine position-II bar only for the W3.5D long reel; it is not a substitute for the 18-tine bar or the shorter 2140 mm parts.




