,

Reel Bar Weld(I) (W3.5D-01D-01-05-06-00)

Part W3.5D-01D-01-05-06-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Reel Bar Weld I (18 Tines, 2290 mm) for FM WORLD 4LZ-6.0P

A longer 2290 mm welded reel bar in position I for the wider FM WORLD 4LZ-6.0P header, carrying 18 tines on 240 mm spacing, 8.8 kg. It belongs to the W3.5D reel set.

Long-bar dimensions

Part numberW3.5D-01D-01-05-06-00
Part typeWelded reel bar (position I)
Bar length2290 mm
Tines18
Tooth length240 mm
Weight8.8 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

Sweep on the wider header

On the wider header this 2290 mm bar reaches the full reel width and guides crop across the whole cutter. Its 18 tines are spaced to keep an even sweep as the reel turns.

Why length matters here

The 2290 mm length separates this W3.5D bar from the shorter 2140 mm bars, and the I ending marks its position. An 18-tine count alone is not enough, because a shorter bar also has 18 tines.

Installing the bar

Lift the bar square to the reel arms and start all fixings before tightening, so the long tube is not twisted. Hand-turn the reel to confirm clearance along the full 2290 mm span.

Because the bar is long, check the centre as well as the ends for any sag or contact before running at speed.

Failure points

  • A bowed tube from a centre impact
  • End or centre weld cracking
  • Tine mounts worn so the row leans
  • Reel imbalance and vibration
  • Rubbing contact along the knife guard
  • Loose end clamps

Ordering notes

Mounting: W3.5D header reel on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Quote the W3.5D part number and the 2290 mm length so we do not send the shorter 2140 mm bar.

Dimensions to match: Compare bar length 2290 mm, 18 tines and mounting centres with the removed bar.

Matching W3.5D reel parts

Questions answered

What makes this different from the 2140 mm 18-tine bar?

The length: this is 2290 mm for the wider W3.5D reel, so the part number and mounting centres differ.

Is this the only long bar I need?

It is position I; the position-II long bar is a separate part with 19 tines.

Identification of W3.5D-01D-01-05-06-00 before ordering

Use this position-I long bar for the W3.5D reel when the old one is bent or has cracked welds; measure first, because it is not interchangeable with the 2140 mm set.

Request a Quote Now