,

Reel Bar Weld(I) (W2.0B-01B-01-05Q-06-00)

Part W2.0B-01B-01-05Q-06-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Reel Bar Weld I (17 Tines) for FM WORLD 4LZ-6.0P Header

This is the first-position welded reel bar on the FM WORLD 4LZ-6.0P header reel, 2140 mm long and carrying 17 tines on 240 mm tooth spacing, 8.3 kg. It sweeps across the cutter as the reel turns.

Reel bar dimensions

Part numberW2.0B-01B-01-05Q-06-00
Part typeWelded reel bar (position I)
Bar length2140 mm
Tines17
Tooth length240 mm
Weight8.3 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What the first bar does

The bar is a welded tube that spans the reel and holds a row of tines. As the reel rotates it sweeps standing crop down and back over the cutter, so a straight bar keeps every tine moving on the same path.

Reading the tine count

The I designation marks its position on the reel rather than a quality grade, and the 17 tines distinguish it from the 18-tine bar used in the next position. Matching the exact part number prevents a mismatch in spacing.

Mounting the bar

Bolt the bar to the reel support arms at both ends and confirm every tine is seated and clear of its neighbour. Turn the reel by hand through a full turn to check the bar does not foul the cutter or the auger.

After fitting, run the reel at low speed and watch for any wobble. A bar that is not seated square will show as a visible weave and can shake the tines loose.

When this bar is replaced

  • A bent tube after a stone or backlash impact
  • A cracked weld at the end mounting
  • Worn or enlarged tine mounting holes
  • Visible runout or imbalance as the reel turns
  • Tines that no longer sweep on one even line
  • Rattling from a loose end fixing

Ordering details

Mounting: Header reel on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Quote the part number and the 17-tine count, and tell us the header width so we confirm the 2140 mm bar fits.

Dimensions to match: Check the bar length 2140 mm, the 17 tines and the end mounting centres against your old bar.

Related header reel parts

  • Part 2296
  • Common questions

    Is this bar sold with the tines fitted?

    It is the welded bar with its tine row; compare the 17-tine count with your removed part before ordering.

    Why are there two bars with the same length?

    The 2140 mm reel uses bars in different positions; this is the 17-tine position-I bar, while the position-II bar has 18 tines.

    Identification of W2.0B-01B-01-05Q-06-00 before ordering

    Order this position-I bar only when the old one is bent, cracked at a weld or has worn tine holes; a straight bar with sound tines does not need replacing.

    Request a Quote Now