,

Reel Spring Teeth(Left-Handed) (W2.5E-01M-01-05-06-02)

Part W2.5E-01M-01-05-06-02. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Reel Spring Tine, Left-Handed, for FM WORLD 4LZ-6.0P Reel

A single left-handed spring-steel reel tine for the FM WORLD 4LZ-6.0P, formed from 6 mm wire with a 280 x 85 x 34 profile, 0.1 kg. It is the flexible finger that bends over the crop.

Tine dimensions

Part numberW2.5E-01M-01-05-06-02
Part typeSpring tine (left-handed)
Profile280 x 85 x 34 mm
Wire diameter6 mm
Weight0.1 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What a spring tine does

The spring tine flexes as the reel pushes it against the standing crop, leaning the stems back toward the cutter and then springing clear. Its temper lets it return to shape after every contact.

Left vs right hand

Left-handed describes the direction of the bend, so the tine must match its mounting position. A right-handed tine fitted on the left side sweeps the wrong way and can foul the bar.

Fitting a replacement tine

Remove the worn tine at its mount, seat the new one in the same orientation and secure it. Check the tip lines up with the neighbouring tines before running the reel.

Replace tines in sets when several are weak, so the whole row has the same spring tension and sweeps evenly.

Why tines break

  • A clean snap at the bend from fatigue
  • Permanent bending so it no longer returns
  • Lost tension and a soft, lazy sweep
  • A worn or corroded mounting end
  • A tip that now lines up short of the others
  • Surface cracks on the spring wire

How to order

Mounting: Header reel on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Tell us the left-hand orientation and the part number; tines are handed and not interchangeable side to side.

Dimensions to match: Check the 6 mm wire, the 280 mm profile and the bend direction against the removed tine.

Bars and telescopic parts

  • Part 2302
  • Tine questions

    Why does the part say left-handed?

    The bend direction is handed; this tine is for the left-sweep position and a right-handed one will not fit the role.

    Should I replace just one tine?

    A single broken tine can be replaced on its own, but if several are weak, fit a set to keep tension even.

    Identification of W2.5E-01M-01-05-06-02 before ordering

    This is the high-frequency consumable on the reel: change a tine as soon as it snaps or loses tension, and keep the hand orientation correct.

    Request a Quote Now