,

Guide Sleeve,Telescopic Teeth (W2.0-01-01-02A-11)

Part W2.0-01-01-02A-11. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Guide Sleeve for Telescopic Reel Tines on FM WORLD 4LZ-6.0P

A guide sleeve for the telescopic tine mechanism on the FM WORLD 4LZ-6.0P reel, 62 x 45 x 26 with a 25 mm bore, only 0.05 kg. The adjusting rod slides through it.

Sleeve dimensions

Part numberW2.0-01-01-02A-11
Part typeGuide sleeve
Size62 x 45 x 26 mm
Bore25 mm
Weight0.05 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

Guiding the sliding rod

The sleeve is a fixed wear part that keeps the telescopic rod moving in a straight line as the tine reach is adjusted. It takes the side load from the sliding rod and protects the mounting hole.

Sleeve vs a bearing

Unlike a rotating bearing, this is a plain guide that the rod slides through, so wear appears as a worn or oval bore rather than race damage. It is replaced when the rod no longer moves true.

Fitting the sleeve

Press or fit the sleeve square into its mount and confirm the rod passes through without binding. The adjustment should slide smoothly through the full travel.

Lubricate per the service manual and avoid any sideways force when fitting, which could pre-load the sleeve.

How a sleeve wears

  • An oval or scored bore
  • Play between rod and sleeve
  • A sleeve that has shifted in its mount
  • Binding or jerky adjustment
  • Visible wear flats on the inside
  • Corrosion that stops the rod sliding

Ordering

Mounting: Plain guide sleeve inside the header reel’s telescopic tine linkage on FM WORLD 4LZ-6.0P (Ruilong) machines.

Confirmation: Send the part number together with the 25 mm bore so we match the sleeve to your rod.

Dimensions to match: Check the 62 x 45 x 26 size and 25 mm bore against the removed sleeve.

Rod and tines

Sleeve questions

Is this a sealed bearing?

No, it is a plain guide sleeve for a sliding rod, not a rotating bearing.

Should I replace it with the rod?

If the rod is also scored, replacing both together gives the best result; otherwise a worn sleeve alone can be changed.

Identification of W2.0-01-01-02A-11 before ordering

Fit a new guide sleeve when the bore is worn or the rod has play; a true sleeve keeps the telescopic tine adjustment accurate.

Request a Quote Now