,

Header Auger Weld (W3.5D-01D-01-02-01-00)

header auger weld. In-stock replacement for the FM WORLD harvester. Order by part number; contact us for exact fitment.

Header Auger W3.5D-01D-01-02-01-00 — 2330 mm, 55 kg

This is the large header auger that pulls the cut crop inward across the full 2.36 m header on the FM WORLD 4LZ-6.0P Ruilong. It is 2330 mm long and 500 mm wide with a 300 mm flight, weighing 55 kg, and turns with retractable fingers to gather a wide swath and feed it toward the centre conveyor. It is the heaviest and widest auger in the crop intake path.

Specifications

Part numberW3.5D-01D-01-02-01-00
TypeHeader auger weld (2.36 m header)
Length x width2330 x 500 mm
Flight diameter300 mm
Weight55 kg
FitsFM WORLD 4LZ-6.0P (Ruilong) Combine Harvester
AvailabilityIn stock, ready to ship

What this auger does

The header auger gathers a full-width swath and forces it inward, so the wide flight and any finger openings take direct contact with incoming stalks. Wear or bending here makes the header feed unevenly across its width, and the 300 mm flight and 55 kg weight reflect the high torque the part carries. The long weld is replaced as a complete unit.

The 2.36 m header auger against the 2.2 m header auger

This 2338 auger is built for the 2.36 m header at 55 kg, while the 2292 is 2200 mm and 52.4 kg for the 2.2 m header. They are matched to different header widths and are not interchangeable, even though both are large 300 mm-flight header augers.

Fitting notes

Rest the heavy weldment on clean, square seats and confirm the long tube runs true before coupling the drive, since a part this wide punishes any misalignment. The retractable-finger timing and any clearance are manual settings taken from the service manual rather than judged by eye. Work the full width through hand rotations to prove there is no point of contact, then lock the mounts and oil both the bearings and the finger mechanism per the manual.

Before you fit it

Inspect the retractable fingers, sliders and header floor, since these can cause the same uneven feeding.

Signs it needs replacing

  • Uneven header feeding across the full width
  • Bent or worn flight edges on the 300 mm auger
  • Finger timing or clearance faults causing crop to bunch
  • Bearing wear or a bent long tube showing as vibration

Compatibility and cross reference

Models covered

Listed for the FM WORLD 4LZ-6.0P Ruilong 2.36 m header; confirm 2330 mm and the 300 mm flight.

Confirming the right part

Match W3.5D-01D-01-02-01-00 and 2330 mm. A 2200 mm part is the 2.2 m header 2292.

Reading the old part

2330 x 500 mm, 300 mm flight diameter, 55 kg. It is the 2.36 m header auger and only 130 mm longer than its 2.2 m sibling — a difference that disappears once both are lying in the same row, so tag the old one before removal.

Questions we are asked about this auger

How do I choose between the two large header augers?

By header width and part number: this 2338 is 2330 mm for the 2.36 m header, the 2292 is 2200 mm for the 2.2 m header. Match the header rather than the flight diameter.

Related parts