,

Canopy (W2.0-13-03A)

Replacement part for FM WORLD 4LZ-6.0P. Verify fitment by part number W2.0-13-03A and contact us for ordering support.

Canopy W2.0-13-03A (1065 x 860 x 140 mm, 4 kg) for FM WORLD

The W2.0-13-03A canopy measures 1065 x 860 x 140 mm and weighs 4 kg, providing a mounted overhead cover for the operator station.

Canopy data

Part numberW2.0-13-03A
ComponentCanopy
Overall dimensions1065 x 860 x 140 mm
Mass4 kg
LocationOperator station
FunctionWeather cover

Protecting the operator station

The canopy creates an overhead barrier against direct sun and rain, helping the operator stay in a stable working position without replacing a fully enclosed cabin.

Canopy and a full enclosed cabin

A canopy offers overhead cover and open access. An enclosed cabin uses panels, seals, locks and often an air-conditioning system, so the two structures are not equivalent.

Mounting the canopy

Check the mounting frame before installation and align all fastener positions. Tighten the canopy evenly so the cover sits level without stress at the brackets.

After fitting, inspect clearance around the operator controls and confirm the cover does not contact moving parts or restrict normal service access.

Canopy damage and mounting wear

  • Cracks from impact or vibration
  • Loose mounting brackets
  • Corrosion around fastener holes
  • Faded or weakened surface after long sun exposure
  • Distorted edges from uneven tightening
  • Missing rubber pads allowing metal-to-metal movement

Checks before ordering

Mounting: Operator-station overhead cover for FM WORLD 4LZ-6.0P combines.

Confirmation: When ordering, identify W2.0-13-03A and cross-check the 1065 x 860 x 140 mm dimensions and 4 kg mass.

Dimensions to match: Compare mounting hole positions, bracket layout, overall size and clearance with the removed canopy.

Cabin and access components

Canopy questions

Does this canopy form a sealed cabin?

No. It provides overhead cover but does not include sealed panels or an enclosed cabin structure.

Why do mounting points wear?

Vibration, loose fasteners, missing pads and corrosion can enlarge or weaken the mounting holes.

Identification of W2.0-13-03A before ordering

Use this canopy when the overhead cover is cracked or its mounting points are worn; inspect the frame and brackets before replacing the cover.

Request a Quote Now