Grain Unloading Hydraulic Cylinder (330 mm) for FM WORLD 4LZ-6.0P
This 6.25 kg unloading cylinder with a 50 mm barrel swings the unloading auger and holds it while grain is discharged.
Unloading cylinder specifications
| Drawing number | W2.5DD-05GX-02-00ED |
| Component | Grain unloading hydraulic cylinder |
| Overall length | 330 mm |
| Overall width | 90 mm |
| Barrel outer diameter | 50 mm |
| Mass | 6.25 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Positioning the unloading auger
On the unloading side, this cylinder swings the unloading auger into position and holds it there while grain runs out.
Unloading versus header cylinders
Header cylinders lift the front attachment, whereas this one moves the unloading auger; the mounting points and length differ.
Installing the unloading cylinder
Pin the unloading cylinder at both ends, connect the oil lines, and cycle the auger slowly to confirm it moves freely.
Swing the auger out and back, then hold it extended to make sure it does not creep.
Conditions that condemn it
- External leak around the seals
- Rod surface scratched or pitted
- Auger drifting from worn piston seals
- Clevis holes worn with play
- Rubber seals hard with age
- Barrel deformed around a mount
Ordering details
Mounting: Grain unloading cylinder of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Give the drawing number and confirm the 330 mm length and 50 mm barrel.
Dimensions to match: Match the 330 mm length and 90 mm mounting width to the old cylinder.
The two header cylinders
Questions buyers ask
What does this cylinder position?
It swings and holds the unloading auger.
What does a creeping auger mean?
Internal seals are worn and oil is leaking past the piston.
Identification of W2.5DD-05GX-02-00ED before ordering
Fit this unloading cylinder where it leaks, the rod is scored or the auger creeps; keep the current one while it holds position.





