,

Lock (WCM.2C-46)

Replacement part for FM WORLD 4LZ-6.0P. Verify fitment by part number WCM.2C-46 and contact us for ordering support.

Lock WCM.2C-46 (230 x 95 x 90 mm, 0.32 kg) for FM WORLD

The WCM.2C-46 lock measures 230 x 95 x 90 mm and weighs 0.32 kg, providing a mechanical locking component for the cabin access assembly.

Lock data

Part numberWCM.2C-46
ComponentLock
Overall dimensions230 x 95 x 90 mm
Mass0.32 kg
LocationCabin access
ActionMechanical locking

Securing the cabin access

The lock keeps the cabin access point secured and allows the operator to open or close it using the matching mechanism.

Lock and canopy cover

The lock controls access, while the canopy provides overhead weather cover. They are separate parts even though both belong to the operator-station area.

Installing the lock

Remove the old lock without damaging the surrounding panel and align the replacement with the original latch and fastener positions.

After fitting, cycle the lock through open and closed positions and confirm the latch engages without forcing the panel.

Why a lock becomes difficult to operate

  • Worn latch creating play
  • Dirt or corrosion making the mechanism stiff
  • Loose mounting changing alignment
  • Damaged key or operating mechanism
  • Bent strike plate
  • Panel distortion preventing full engagement

What to confirm

Mounting: Cabin access lock for the FM WORLD 4LZ-6.0P.

Confirmation: Order by WCM.2C-46 and verify the 230 x 95 x 90 mm dimensions and 0.32 kg mass.

Dimensions to match: Match the latch position, mounting holes, strike plate and operating mechanism before fitting.

Cabin and access hardware

Lock questions

Why will the lock not engage fully?

A worn latch, bent strike plate, loose mounting or distorted panel can prevent full engagement.

Is the canopy included with this lock?

No. The lock is a separate cabin access component.

Identification of WCM.2C-46 before ordering

Use this lock when the access mechanism is worn or misaligned; inspect the strike plate and panel first so the lock is not adjusted for a panel fault.

Request a Quote Now