Engine Oil Filter 4L88-261100A for FM WORLD 6.0P
This is the spin-on engine oil filter for the FM WORLD 4LZ-6.0P, 100 mm tall and 96 mm in diameter, weighing 0.55 kg. It cleans the lubricating oil that protects the engine’s bearings and cylinder surfaces.
Specifications
| Part number | 4L88-261100A |
|---|---|
| Type | Spin-on engine oil filter |
| Height | 100 mm |
| Diameter | 96 mm |
| Weight | 0.55 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
Lubricating oil picks up metal and combustion particles continuously, and this filter traps them so they do not circulate into the bearings and onto the cylinder walls. A blocked filter can open its bypass and send unfiltered oil through the engine, which is why the filter is changed with the oil rather than left on for a second oil service. On a spin-on unit the gasket and a clean mounting face are what seal it, and the old gasket must come off with the old filter. Any metal seen when the old canister is cut open is a warning of engine wear, not a normal service finding.
Oil filter versus the fuel filters
The fuel filters protect the injection system and sit on the diesel supply; this shorter 100 x 96 mm canister is on the lubricating oil circuit. The fluid and the mounting position separate them even though both spin on.
Fitting notes
Clean the mounting face, confirm the old gasket is removed, lightly follow the service manual for fitting, and refill with the specified engine oil and level.
Before you fit it
Run the engine briefly and check the gasket for leaks, then recheck the oil level once the new filter has filled.
Signs this part needs replacing
- Blocked media opening the bypass and sending unfiltered oil
- Leak at the gasket from a doubled seal or dirty face
- Metal in the old canister indicating engine wear
- Low oil pressure from a faulty or blocked filter
Compatibility and cross-reference
Where it fits
Spin-on lubricating oil filter on the FM WORLD 4LZ-6.0P engine, 4L88.
Confirming the correct part
Confirm 4L88-261100A by the 100 x 96 mm oil canister. The fuel filters are on a different circuit.
Reading the old part
The short spin-on body and the oil-circuit mounting identify this filter; fuel canisters are taller and sit on the fuel line.
Frequently asked questions
Should the oil filter be changed at every oil service?
Yes. A filter left on past an oil change can load up and open its bypass, circulating unfiltered oil. The filter and the oil are serviced together.
What would metal in the old filter mean?
A warning that a bearing or engine surface is wearing. It is investigated rather than dismissed, following the service manual diagnosis.





