Diesel Pre-Filter 4G33TC-281000V for FM WORLD 6.0P
This is the plain diesel pre-filter/water separator for the 4G33TC engine in the FM WORLD 4LZ-6.0P, 190 mm tall and 96 mm in diameter, weighing 0.65 kg. Unlike the powered assembly, it has no electric pump and is a bowl-type separator.
Specifications
| Part number | 4G33TC-281000V |
|---|---|
| Type | Pre-filter / water separator |
| Height | 190 mm |
| Diameter | 96 mm |
| Weight | 0.65 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
This bowl separates water and settles sediment before the final fuel filter, protecting the injection pump from the corrosion and lubricity loss that water causes. With no electric pump fitted, it relies on the engine’s feed, so after service the system is primed carefully and air is bled at the designated points. The clear bowl and its drain are the routine service points; a cracked bowl, a failed drain seal or a head that lets air in are the structural faults. It works in series with the spin-on final filter, which does the fine cleaning.
Plain bowl versus the powered assembly
The powered pre-filter is a 310 mm assembly with an electric pump and wiring; this is a simpler 190 mm bowl with no pump. The absence of wiring identifies it, and the two are not interchangeable.
Fitting notes
Fit the bowl and head seals square, drain any water, and prime and bleed the fuel system as the service manual describes so no air reaches the injection pump.
Before you fit it
Inspect the clear bowl for cracks and the drain for tightness; a bowl that lets air in causes hard starting even when the media is clean.
Signs this part needs replacing
- Water left standing in the bowl
- Cracked bowl or leaking drain seal admitting air
- Hard starting or misfire from air in the fuel
- Sediment reaching the final filter if the bowl is not serviced
Compatibility and cross-reference
Where it fits
Plain diesel pre-filter/water separator on the 4G33TC engine in FM WORLD 4LZ-6.0P.
Confirming the correct part
Confirm 4G33TC-281000V by the 190 mm bowl with no wiring. The 310 mm powered assembly is a different part.
Reading the old part
The clear bowl and the absence of an electrical connector identify this pre-filter.
Frequently asked questions
Can I use this in place of the electric-pump assembly?
No. They are different parts for different setups; this bowl has no pump or wiring. The correct one is read from the machine’s existing fuel system.
How is air removed after changing this bowl?
The system is primed and bled at the service-manual points, since this version has no electric pump to do the priming.




