,

Diesel Oil Pre-filter Assy(Electron Pump) (4G33TC-280000W)

Diesel Oil Pre-filter Assy(Electron Pump) (4G33TC-280000W). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Diesel Pre-Filter Assembly with Electric Pump 4G33TC-280000W

This is the diesel pre-filter assembly with an integrated electric pump for the FM WORLD 4LZ-6.0P engine, 310 x 165 x 125 mm and 2.8 kg. It combines water separation and lift/priming in one unit on the fuel supply before the final filter.

Specifications

Part number4G33TC-280000W
TypePre-filter assembly with electric pump
Size310 x 165 x 125 mm
Weight2.8 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
AvailabilityIn stock, ready to ship

What this part does

Diesel naturally holds small amounts of water and sediment, and this pre-filter drops them in a collection bowl before they reach the injection pump, where water would remove lubrication and corrode precision parts. The electric pump both lifts fuel from the tank and primes the system after a filter change, which is why this assembly is heavier and wired rather than a simple bowl. Routine care is draining the water bowl and watching the sensor; harder faults are a pump that will not run or a bowl/head that leaks. Air in the system after service is purged using the pump, not by cranking the engine.

Assembly versus the plain pre-filter

The plain pre-filter (4G33TC-281000V) is a 190 mm bowl without the electric pump; this is the complete 310 mm powered assembly. The wiring and the pump identify it, and the two are not interchangeable.

Fitting notes

Fit the assembly with its seals square, connect the pump wiring cleanly, and use the electric pump to prime and bleed air before starting. Water draining and sensor checks follow the service manual.

Before you fit it

After fitting, confirm the pump runs and the bowl fills without air leaks, since a priming fault is often a sealing or connection issue rather than a failed pump.

Signs this part needs replacing

  • Water collected in the bowl and not drained
  • Electric pump that will not run or will not build pressure
  • Leaking bowl or head seals letting air into the fuel
  • Engine misfire or hard starting from water or air in the supply

Compatibility and cross-reference

Where it fits

Powered diesel pre-filter/water separator on the FM WORLD 4LZ-6.0P fuel supply, 4G33TC engine.

Confirming the correct part

Confirm 4G33TC-280000W by the 310 mm assembly with wiring and an electric pump. The plain 190 mm bowl is a different part.

Reading the old part

The pump motor and electrical connector identify this assembly; the unpowered pre-filter has no wiring.

Frequently asked questions

What is the electric pump for?

It lifts fuel from the tank and primes the system after servicing, so air can be bled without long cranking. It is part of this assembly and absent from the plain pre-filter.

How often should water be drained?

The bowl is checked and drained as the service manual and the water sensor indicate; standing water must not be left to reach the injection pump.

Related parts