Engine Oil Pan Welded Parts (5.3 kg, 525 x 340 x 210 mm) for FM WORLD 4LZ-6.0P
This 5.3 kg welded oil pan, 525 x 340 x 210 mm, bolts under the engine and holds the engine oil with the drain plug at the bottom.
Oil pan data
| Drawing number | 4L88-111000F |
| Component | Welded oil pan |
| Dimensions | 525 x 340 x 210 mm |
| Mass | 5.3 kg |
| Contents | Engine oil |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Holding the engine oil
The pan forms the lower reservoir of the engine lubrication system, holding the oil the pump draws and the drain plug empties.
Oil pan versus the fuel tanks
The fuel tanks store diesel and mount on the frame, while this pan bolts directly to the engine and holds engine oil.
Fitting the oil pan
Clean the mating face, fit a new gasket, and tighten the bolts evenly and per the service manual.
Refill with the correct oil, run the engine, and confirm the gasket and drain plug stay dry.
Leak and impact signs
- Leak at the gasket or bolts
- Dents from ground impact
- Cracked welds
- Drain plug thread damaged
- Sludge and deposits inside
- Warped mounting face
Checks before ordering
Mounting: Welded oil pan of the 4L88 engine on FM WORLD 4LZ-6.0P (Ruilong).
Confirmation: Quote the drawing number and confirm the 5.3 kg, 525 x 340 x 210 mm pan.
Dimensions to match: Match the bolt pattern, gasket face and drain plug position.
Fuel tanks and engine parts
Buyer questions
Where does it usually leak?
At the gasket face or around the drain plug.
Why would it need replacing?
A hard impact can dent or crack it, and damaged plug threads will not seal.
Identification of 4L88-111000F before ordering
Choose this pan for leaks, dents or a cracked weld; always fit a fresh gasket and check the drain plug threads.





