,

Charge Pump Gear(Outer) (WHST40-13A-02)

Charge Pump Gear(Outer) (WHST40-13A-02). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Charge Pump Outer Gear WHST40-13A-02 for FM WORLD 6.0P

This is the outer gear of the charge pump for the HST system in the FM WORLD 4LZ-6.0P, a ring gear 60 mm across and 16 mm wide, weight 0.1 kg. It works with the inner gear as a matched pair.

Specifications

Part numberWHST40-13A-02
TypeCharge pump outer gear
Outer diameter60 mm
Width16 mm
Weight0.1 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

The outer gear is the ring member of the charge pump gear set. As the inner gear turns inside it, the changing spaces between them draw in and push out oil, supplying the make-up flow that keeps the closed hydrostatic loop filled and its low-pressure side charged. Because the pump’s sealing depends on the close fit between the two gears and the housing, the outer gear is matched to the inner gear rather than replaced in isolation.

Outer gear against the inner gear

The outer gear is the larger ring with internal teeth, while the inner gear is the smaller driven member that turns inside it. They form one meshing pair and are not interchangeable.

Fitting notes

Fit the outer gear with the inner gear as a set and check the clearances and free rotation in the housing per the service manual. Keep the faces clean and lubricated during assembly.

Before you fit it

Inspect the gear teeth and housing bore for wear or scoring. Worn clearances let charge oil slip back, lowering the charge pressure and risking cavitation in the HST.

Signs this part needs replacing

  • Worn teeth or housing clearance reducing charge pressure
  • Scoring on the gear face
  • Noise from the charge pump
  • HST cavitation or weak response from lost make-up oil

Compatibility and cross-reference

Where it fits

Within the charge pump case of the HST drive on the FM WORLD 4LZ-6.0P, surrounding the inner gear.

Confirming the correct part

Confirm by part number WHST40-13A-02 and the 60 mm outer diameter.

Reading the old part

Identify the ring gear by its internal teeth and match it to the inner gear and housing.

Frequently asked questions

What does the charge pump do?

It supplies make-up oil to the closed hydrostatic loop, replacing internal leakage and keeping the low-pressure side charged to prevent cavitation.

Should the outer gear be replaced alone?

It is a matched pair with the inner gear, so they are best checked and replaced together to keep the clearances correct.

Related parts