,

Involute Gear Pump (W2.5DD-05DC-09-00E)

Involute Gear Pump (W2.5DD-05DC-09-00E). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Involute Gear Pump W2.5DD-05DC-09-00E for FM WORLD

This is an involute gear pump for the FM WORLD machine, 150 × 118 × 90 mm, with an 18 mm port and an 11-spline drive, weight 3.7 kg. It is a positive-displacement gear pump used to move oil under pressure.

Specifications

Part numberW2.5DD-05DC-09-00E
TypeInvolute gear pump
Size150 × 118 × 90 mm
PortΦ18 mm
Drive11 splines
Weight3.7 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

Two meshing gears with involute teeth rotate inside a close-fitting housing. Oil is carried in the spaces between the teeth and the housing from the inlet to the outlet, while the meshing teeth at the centre prevent it flowing back. This gives a steady flow in proportion to speed and the pressure needed to drive hydraulic or lubrication circuits. The involute tooth shape keeps the contact smooth as the gears roll together.

Gear pump against a centrifugal pump

A centrifugal pump moves fluid with a spinning impeller and can vary its flow. A gear pump is positive displacement, moving a fixed amount per revolution and building pressure against a closed circuit, so it suits hydraulic and oil-transfer duties.

Fitting notes

Align the splined drive and mount the pump square with the correct gasket, then connect the inlet and outlet ports as marked. Confirm rotation direction and check pressure and for leaks after start-up against the service manual.

Before you fit it

Inspect the splines and the gear housing for wear and check the inlet strainer. Worn gear or housing clearances let oil slip back and reduce flow and pressure.

Signs this part needs replacing

  • Reduced flow or pressure as gear and housing clearances wear
  • Whining or noise from the gear set
  • Worn splines or shaft allowing drive slip
  • External oil leaks at the mounting face or seals

Compatibility and cross-reference

Where it fits

Hydraulic/oil circuit of the FM WORLD machine, driven through the splined shaft.

Confirming the correct part

Confirm by part number W2.5DD-05DC-09-00E, the 11-spline drive, and the port and mounting fit.

Reading the old part

Identify the pump by the gear housing and splined drive, and match the port size and bolt pattern.

Frequently asked questions

Why is it called an involute gear pump?

The gear teeth use an involute profile that rolls smoothly as they mesh, and the spaces between the teeth carry the oil from inlet to outlet.

What makes it positive displacement?

It moves a fixed amount of oil per revolution rather than relying on impeller speed, so it can build pressure in a hydraulic circuit.

Related parts