6004 Deep Groove Ball Bearing for FM WORLD 4LZ-6.0P
A 20 mm bore, 42 mm outer ring and 12 mm width define the 6004 unit used on the FM WORLD 4LZ-6.0P. At 0.07 kg it lets a shaft rotate freely while the hardened rings carry the working load.
Specifications of the 6004 unit
| Part number | 6004 |
| Bearing type | Deep groove ball, single row |
| Bore | 20 mm |
| Outer ring | 42 mm |
| Width | 12 mm |
| Weight | 0.07 kg |
| Fits | FM WORLD 4LZ-6.0P Ruilong |
How the slim 60 series is built
Its leading 6 identifies a deep groove ball bearing, the middle 0 is the slim diameter series, and 04 is the bore code for 20 mm. Because the 60 series keeps the outer ring compact, it suits a tight housing. Caged balls run in matching hardened grooves, accepting radial force together with a measure of axial force in either direction.
Telling a worn bearing from a damaged shaft
A bent or scored shaft and a rough bearing can sound alike. Turn the shaft by hand to locate the play, and inspect the journal first, since a damaged shaft will ruin a fresh ring even when the bearing itself is new.
Correct way to fit it
Drive it home with a flat sleeve that bears on the inner ring, keeping everything square, and never strike the outer ring or the balls. Clean the journal and seat and confirm the fits against the service manual before assembly.
No seal suffix appears on this number, so it is an open unit lubricated through the machine’s own arrangement rather than sealed for life. Keep it wrapped until fitting and never spin it while dry or dirty.
Signs that call for replacement
- A grinding rumble once the raceway begins to spall
- Roughness or slack felt while turning the shaft
- Flaking metal visible on the balls or tracks
- Vibration transferred into the housing
- Lubricant loss or heat from a worn track
- Indentation marks left by impact or overload
Ordering details
Mounting: Mounted on a rotating journal of the FM WORLD 4LZ-6.0P and located against its seat.
Verify: Verify number 6004 together with the 20 / 42 / 12 mm measurements.
Dimensions to match: Check bore and outer ring against the shaft and housing, then the width and ring layout.
Related standard parts
Common questions
What information does 6004 carry?
The 6 marks a deep groove ball bearing, the 0 is the slim series, and 04 codes the 20 mm bore that matches the measured dimensions.
Does it arrive sealed?
Without a 2RS suffix it is open, relying on the machine’s own sealing and lubrication rather than being greased for life.
6004 identification before ordering
Read the number etched into the ring and measure the three dimensions. If the etching is faint, send the number and a clear photo through the quote form and the correct unit will be confirmed.





