HST Pump Swash Plate (45 Series, 105 mm) for FM WORLD 4LZ-6.0P
This 2 kg pump-side swash plate, 290 by 113 by 60 mm with a 105 mm outer and 45 mm bore, changes its angle to vary the pump’s oil flow.
Pump swash plate dimensions
| Drawing number | WHST45-1 |
| Component | Pump swash plate |
| Reference dimensions | 290 x 113 x 60 mm, outer 105 mm, bore 45 mm |
| Set contents | 1 piece |
| Mass | 2 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Angling to vary the flow
Tilting this pump plate changes how far the plungers stroke, which varies the oil flow and so controls the machine’s speed and direction.
Pump versus motor swash plate
The motor plate is smaller and turns flow into rotation, whereas this larger pump plate is angled to set the flow.
Installing the pump plate
Fit the plate to its pivot and control linkage, confirm it moves through its full angle, and keep the face clean.
After assembly, vary the speed forward and reverse and confirm the angle changes smoothly without sticking.
Conditions that score the face
- Swash face grooved or pitted
- Pivot worn with play
- Slipper wear marking the surface
- Plate not moving through full angle
- Contamination scoring the face
- Linkage binding
Checks to make
Mounting: Pump swash plate of the 45-series HST on FM WORLD 4LZ-6.0P (Ruilong).
Confirmation: Quote the drawing number and confirm the 45-series single-piece pump plate.
Dimensions to match: Match the 105 mm outer, 45 mm bore and pivot to the old plate.
Motor plate and complete HST
Questions answered
How does it change speed?
Tilting the plate alters plunger stroke and therefore the oil flow.
What is the main failure?
A scored running face or a worn pivot, often from contaminated oil.
Identification of WHST45-1 before ordering
Replace this plate when the face is scored or the angle no longer varies smoothly; check the control linkage and follow the service manual.





