HST Motor Swash Plate (100 mm) for FM WORLD 4LZ-6.0P
This 1.1 kg motor-side swash plate, 100 mm outer with a 45 mm bore and 45 mm height, converts the oil flow back into rotation on the motor side.
Motor swash plate data
| Drawing number | WHST40-10 |
| Component | Motor swash plate |
| Reference dimensions | Outer 100 mm, bore 45 mm, height 45 mm |
| Set contents | 1 piece |
| Mass | 1.1 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Converting flow to rotation
On the motor side, the plunger slippers press against this angled face, and the oil pressure on them turns the output shaft.
Motor versus pump swash plate
The pump plate is angled to vary the flow, while the motor plate turns that flow back into rotation; the two differ in size and role.
Fitting the motor plate
Mount the plate on its locating face, check the angle and seat, and keep the running surface protected and clean.
Run the HST through its range and confirm steady output without noise or vibration.
Face damage signs
- Running face scored or pitted
- Surface worn by the slippers
- Metal debris marking the plate
- Locating seat damaged
- Uneven wear causing vibration
- Cracking at the edge
Before ordering
Mounting: Motor swash plate of the 40-series HST on FM WORLD 4LZ-6.0P (Ruilong).
Confirmation: Quote the drawing number and confirm the single-piece 100 mm motor plate.
Dimensions to match: Match the 100 mm outer and 45 mm bore to the removed plate.
Pump plate and plungers
Buyer questions
Is it the pump or motor plate?
This is the motor-side plate that turns flow into rotation.
What marks a worn plate?
Scoring or pitting on the face the slippers run against.
Identification of WHST40-10 before ordering
Replace this plate when its face is scored or worn, with the oil and slippers checked at the same time; follow the service manual.





