HST Shoe Plate (2 Pieces, 90 mm) for FM WORLD 4LZ-6.0P
This 0.1 kg shoe plate, supplied as two pieces with a 90 mm outer and 40 mm inner diameter, backs the plunger slippers as they run against the angled plate.
Shoe plate specifications
| Drawing number | WHST40-09 |
| Component | Shoe plate |
| Reference dimensions | Outer 90 mm, inner 40 mm, height 4 mm |
| Set contents | 2 pieces |
| Mass | 0.1 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Backing the plunger slippers
The shoe plate holds the plunger slippers against the swash face and keeps them tracking evenly while the cylinder block rotates.
Shoe plate versus swash plate
The swash plate is the angled surface that strokes the plungers, while this shoe plate retains and backs their slippers.
Installing the shoe plate
Place both pieces in the correct order, confirm the slippers seat on them, and assemble with clean oil.
After fitting, run the drive and check for smooth rotation without noise from the slippers.
Wear on the running face
- Running face worn or grooved
- Plate scored by metal particles
- Slippers losing contact
- Cracking or chipping
- Uneven wear causing noise
- Surface pitting
Ordering checks
Mounting: Shoe plate of the 40-series HST on FM WORLD 4LZ-6.0P (Ruilong).
Confirmation: Quote the drawing number and confirm the two-piece 90 mm plate.
Dimensions to match: Match the 90 mm outer and 40 mm inner diameter to the old plate.
Plungers and swash plates
Questions buyers ask
What holds the slippers in place?
The shoe plate keeps them seated on the swash face.
Why is it supplied as two pieces?
The assembly uses two plates fitted in a set order.
Identification of WHST40-09 before ordering
Replace this shoe plate when its face is worn or scored, usually together with affected plungers; follow the service manual.





