Complete HST Hydrostatic Transmission (28 kg, Right Side) for FM WORLD 4LZ-6.0P
This 28 kg complete hydrostatic transmission, 292 by 280 by 205 mm, replaces the whole right-side drive unit rather than a single internal part.
Complete HST specifications
| Drawing number | W2.0-03(R)-03B-01-00 |
| Component | Complete HST assembly |
| Overall dimensions | 292 x 280 x 205 mm |
| Mass | 28 kg |
| Position | Right side |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Driving the machine without gears
Inside the unit, a variable pump pushes oil to a motor, changing speed and direction by oil flow alone, with no mechanical gear shifting.
Full unit versus single components
The plungers, plates and springs are internal parts of this same unit; when several are worn, replacing the complete HST is often more reliable.
Mounting the complete transmission
Bolt the unit to its mounting face, connect the drive and oil lines, and purge the air following the service manual.
Move the machine forward and reverse through the full speed range and confirm the drive holds without creeping.
Faults of the whole unit
- Internal leakage with weak or lost drive
- Noise from worn bearings or plates
- Drive creeping at idle
- Oil leaking from the housing or seals
- Contamination damage across the unit
- Loss of power in one direction
Before ordering a unit
Mounting: Complete right-side HST of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Quote the drawing number, confirm the right-side position and the 28 kg unit.
Dimensions to match: Match the 292 x 280 x 205 mm mounting and the oil line positions.
Internal HST components
Buyer questions answered
When is a full unit better than parts?
When several internal components are worn or contamination has spread through the housing.
Does it need bleeding after fitting?
Yes, air must be purged following the service manual before normal use.
Identification of W2.0-03(R)-03B-01-00 before ordering
Choose the complete HST when internal wear is widespread or the unit leaks and creeps; for a single failed part, the smaller components can be used.





