HST Relief Spring (2 Pieces, 28 x 12 mm) for FM WORLD 4LZ-6.0P
This 0.06 kg relief spring, supplied as two pieces and 28 mm long with a 12 mm diameter, sets the point at which the pressure relief opens.
Relief spring data
| Drawing number | WHST40-02-6 |
| Component | Relief spring |
| Reference dimensions | 28 x Phi12 mm |
| Set contents | 2 pieces |
| Mass | 0.06 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Setting the relief opening
The relief spring pushes the valve onto its seat until the pressure is high enough to lift it, protecting the HST from overpressure.
Relief versus charge spring
It is longer than the charge spring and works on the relief side; the two have different jobs and lengths.
Fitting the two-piece spring
Fit both pieces in the correct order and orientation, seat them cleanly, and avoid altering the shim arrangement.
Run the transmission through its load range and confirm the relief does not open during ordinary work.
Replacement warning signs
- Tired spring opening too early
- Broken or collapsed coil
- Weak drive from early relief
- Corrosion on the coils
- Loss of free length
- Uneven seating
What to confirm
Mounting: Relief spring of the 40-series HST on FM WORLD 4LZ-6.0P (Ruilong).
Confirmation: Quote the drawing number and confirm the two-piece 28 x Phi12 set.
Dimensions to match: Match the free length and the two-piece arrangement to the old spring.
Charge spring and stem
Common questions
Why would the machine feel weak?
A weak relief spring opens the valve before working pressure is reached.
Are both pieces replaced together?
Yes, the set is supplied and fitted as two pieces.
Identification of WHST40-02-6 before ordering
Replace this spring when the drive feels weak, the relief opens early or a coil is broken; the setting remains per the service manual.





