Rubber Crawler Track 5T076-2312-0
The DC70 catalogue lists 5T076-2312-0 as CRAWLER at reference 010 of figure C10000, quantity two, which matches one track for each side of the machine. The product record describes it as a rubber crawler track, while the catalogue itself gives only the assembly name, so width, pitch and link count are read from the removed track rather than from this page.
Catalogue entry for 5T076-2312-0
| Part Number | 5T076-2312-0 |
|---|---|
| Product | Rubber Crawler Track |
| Catalogue Name | CRAWLER |
| Figure | C10000, p.99-100 |
| Reference No. | 010 |
| Q’TY per side | 2 tracks |
| Machine Column | DC-70G |
| System | Crawler track / running gear |
One track per side, listed on the CRAWLER line
The rubber track carries the whole machine and spreads its weight over the paddy soil. Lug shape gives grip in wet ground, the steel cores inside hold the track to length, and the inner guide faces keep it tracking on the rollers and guides. A track that runs loose will climb off the guide, and one that runs tight loads every roller and bearing on the frame.
Wear and failure signs
Checks that matter in the field: lug blocks torn away, cracks around the core ends, a track that has grown longer than the frame can tension, a cut or bulge on the inner face, mud packed between lugs, and a track that walks off one side. Wear shows first on the lugs at the drive end, because that is where slip happens when the machine is worked hard in wet soil.
How to confirm the right part
Compare the removed track with 5T076-2312-0 by width, lug pattern, lug spacing and the number of cores, and check the inner guide faces for a worn profile. The catalogue gives no dimensions, so measurement of the old track is the only reliable way to confirm the part before ordering, especially where a machine has been re-tracked with a non-original size.
Tension and season planning
Set tension with the machine on level ground after the track has been cleaned, and recheck it after the first day of work, since new tracks settle. Keep the track off sharp stubble and road edges when moving between fields, because a cut inner face is the most common reason a healthy track is scrapped early.
The chassis track category lists the rest of the DC70 running gear, and the guide pages linked here are the parts that keep this track centred: Crawler Guide Front Idler (5T072-2341-2), Crawler Guide Rear Idler (5T072-2342-3).





