How to Order Combine Harvester Parts: Part Number Checklist

Most combine harvester spare-part inquiries are delayed not because the part is hard to find, but because the first message only says the machine model and leaves out the engine code, the part number, the quantity or a usable photo. This checklist shows the information that lets us identify the exact replacement once, match it to the factory catalogue or BOM, and return one consolidated quote for the whole list.

Whether you run a Kubota, FM World, Yanmar, Lovol or Zoomlion combine, the same rules apply: model name narrows the family, the part number and engine code lock the item, and the old part or nameplate photo confirms the fitment before anything is written onto the proforma invoice (PI).

Why trust this guide. Prepared by the Agri Part Supply spare-parts team, which supplies after-sales combine harvester parts. We take no sponsorship for any position and our focus is a correct fitment, not machine marketing. Every fitment, grade, quantity, destination and price on the PI follows the written catalogue/BOM, the old part and your written quote; we do not commit to parts outside the confirmed catalogue. Pricing, warranty terms, samples and shipping depend on configuration, volume, destination port and own-brand arrangement, so ask for a written quote.

Information to include in your spare-parts inquiry

Send the six items below in one message, with each part number on its own line and the quantity beside it. The more of these you provide, the fewer round trips we need to confirm the match.

What to includeWhat to writeWhy it matters
Machine brand and full modelWrite the brand and complete model, e.g. Kubota DC70G, Yanmar AW82, FM World 4LZ-6.0P, Zoomlion ZL105; add the year if known.Model names alone can cover several engine, header and track versions, which carry different part numbers.
Engine modelQuote the engine code from the nameplate or parts book, e.g. 4TNV98, 4TNV98T, V2403.Naturally aspirated and turbo versions of the same engine family do not share all internal parts.
Part numberCopy the OEM, original or replacement number stamped on the part, character for character, with hyphens kept.A single wrong digit sends the inquiry to the wrong piston, seal or gear.
Part nameState the English or local name you use, e.g. water pump, intake manifold, oil seal, track roller.The name helps us confirm the item when the number is worn or illegible.
QuantityGive the count for each number and the unit (pieces, sets, pairs).Quantities change grade selection, packing and the consolidated quote.
Clear photosSend photos of both sides of the worn part and the machine nameplate; include the old number close-up.Photos let us cross-check shape, seal type and fitting dimensions when the number is missing.

Confirm fitment from the catalogue or BOM

A model name alone is not enough for the exact internal parts. On the PI we lock the engine code, the HST displacement (cc) where relevant, and the track size (width × pitch × links), rather than repeating only the machine model. Parts from the naturally aspirated and turbocharged versions of the same engine family are not always interchangeable, so we confirm the engine before matching pistons, injectors, turbo or seal parts.

Use the brand catalogue to locate the assembly in the exploded view, then quote the reference number shown there. For an example of how the catalogue index groups parts by system, see the Kubota DC70 parts page and the Yanmar AW82 parts page; the full brand catalogue request is on the catalog download page.

Common mistakes that delay the order

  • One digit copied wrong. Part numbers with hyphens and prefixes are transcribed by hand; re-check the number against the old part and the catalogue before sending.
  • Mixing NA and turbo parts of the same family. A 4TNV98 naturally aspirated and a 4TNV98T turbo engine share some external parts but differ on turbo, manifold and internal components; confirm the suffix.
  • Sending only a full-machine photo. A wide photo of the combine does not show the worn part or its number; photograph the component and the nameplate separately.
  • Quantity without a unit. State pieces, sets or pairs for each number; a seal or bushing ordered as a “pair” changes packing and price.
  • Leaving out the destination port. Freight options, Incoterms and lead time depend on the destination; add it with the inquiry so the quote is complete on the first pass.

How we check the item and prepare the quote

Our workflow follows the catalogue rather than guesswork: we read the part number, match it to the factory catalogue or BOM, confirm fitment against the engine code and old part, then issue one PI covering the whole list. Items we hold ready and items made to order are labelled separately on the quote, and several quality and price grades can be offered for fast-moving wear parts. You may mix header, threshing, chassis, gearbox and engine items in one shipment to save freight.

For the parts that wear fastest each season, see the wear-parts replacement guide; header, feeder and conveyor items are covered in the header system guide, threshing and cleaning items in the threshing and cleaning guide, and bearing sizes in the bearing size chart.

FAQ

What if I do not have the part number?
Send the machine brand, full model and engine code, plus clear photos of the old part from both sides and the nameplate. We match the item against the catalogue and BOM and confirm the exact number before quoting; you do not need to identify the part yourself.
Can you supply parts based on the machine model alone?
Model alone narrows the search to one family, but it does not lock the exact part: the same combine can run different engine, header and track versions by year. We confirm fitment against the engine code, the catalogue or BOM, and the old part before we list an item on the proforma invoice.
When the part number and the catalogue disagree, which do we follow?
We take the number stamped on the installed part as the primary reference, then check it against the factory catalogue or BOM for supersessions and revision differences. If a number has been superseded, we confirm the replacement number and fitment with you before the PI is issued.
Is there a minimum order quantity or sample policy?
There is no fixed public minimum for trade inquiries; the grade, quantity, destination port and own-brand arrangement are set per order in the written quote and PI. State your quantity and destination in the first message, and we reply with the available options and terms.

Leave a Comment

Your email address will not be published. Required fields are marked *