Combine Harvester Bearing Size Chart: 6304, 6305, 6209, 6210

Bearings are among the most frequently replaced parts on a combine harvester. They support the shafts that run the header reel, feeder house, augers, gearbox, fan and track rollers; when a bearing starts to rumble, heat up or leak grease, the fastest way to order the right replacement is to match the bore, outside diameter and width rather than guess from the machine name. This guide lists the deep groove ball bearings we keep for combine harvesters, with the ISO 15 boundary dimensions and a direct link to each in-stock part.

These are standard general-purpose bearings used across combine harvester brands. Confirm the fitment against the old bearing, the parts book or the machine BOM before ordering; a standard bearing is selected by its three boundary sizes, not by the harvester brand alone.

Why trust this guide. Prepared by the Agri Part Supply spare-parts team, which supplies after-sales combine harvester parts. We take no sponsorship for any position and our focus is fitment detail, not machine marketing. The dimensions below are nominal ISO 15 open-bearing boundary values; the installed part, clearance class and seals must be checked against the old bearing, the parts book or the BOM on your proforma invoice. Pricing and warranty terms are set per order (configuration, volume, destination port, own-brand arrangement); ask for a written quote.

How to read a bearing number

A six-digit deep groove ball bearing number encodes its size:

  • First digit 6 — single-row deep groove ball bearing, the most common radial bearing.
  • Second digit — dimension series: 0 = 6000 light section, 2 = 6200 medium, 3 = 6300 heavy. A heavier series carries more load on the same shaft but needs a larger housing bore.
  • Last two digits — bore code: 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm; from 04 upward the bore is the code × 5 mm (04 = 20 mm, 05 = 25 mm, and so on).

Common suffixes do not change the three boundary sizes: -2RS contact rubber seals on both sides, -2Z / ZZ metal shields, C3 greater-than-normal internal clearance for hot-running or interference fits. A 6304-2RS keeps the same 20 × 52 × 15 mm body as an open 6304.

Deep groove ball bearings in stock: size chart

The table below covers the standard deep groove ball bearings listed in our combine harvester range. d = bore (shaft) diameter, D = outside (housing) diameter, B = bearing width, all in millimetres. The starred models are the sizes most often requested. Follow the model link to the matching product page.

BearingSeriesd bore (mm)D OD (mm)B width (mm)
6002-2RS6000 light15329
60046000 light204212
6005-2RS ★6000 light254712
6006-2RS ★6000 light305513
6007-2RS6000 light356214
6008-RS6000 light406815
6012-2RS6000 light609518
6202-2RS6200 medium153511
6203-2RS6200 medium174012
6204-2RS6200 medium204714
6205-2RS6200 medium255215
6209-2RS ★6200 medium458519
6210-2RS ★6200 medium509020
6301-2RS6300 heavy123712
6304-2RS ★6300 heavy205215
6305-2RS ★6300 heavy256217
6306-2RS6300 heavy307219
6307-2RS ★6300 heavy358021
6308-2RS6300 heavy409023
63106300 heavy5011027

The sizes searched most often

6304-2RS — 20 × 52 × 15 mm

Heavy (6300) series on a 20 mm shaft; it carries more load than a 6204 on the same shaft but needs a larger housing bore. Order the matching in-stock part: 6304-2RS.

6305-2RS — 25 × 62 × 17 mm

Heavy (6300) series on a 25 mm shaft; the heavy-duty equivalent of a 6205 for the same shaft diameter. Order the matching in-stock part: 6305-2RS.

6307-2RS — 35 × 80 × 21 mm

Heavy (6300) series on a 35 mm shaft, used where radial load and housing space allow the heavier section. Order the matching in-stock part: 6307-2RS.

6209-2RS — 45 × 85 × 19 mm

Medium (6200) series on a 45 mm shaft, a common size for larger shafts in drives and transmissions. Order the matching in-stock part: 6209-2RS.

6210-2RS — 50 × 90 × 20 mm

Medium (6200) series on a 50 mm shaft, with a 90 mm housing bore and 20 mm width. Order the matching in-stock part: 6210-2RS.

6005-2RS — 25 × 47 × 12 mm

Light (6000) series on a 25 mm shaft, the narrow-section option where housing space is limited. Order the matching in-stock part: 6005-2RS.

6006-2RS — 30 × 55 × 13 mm

Light (6000) series on a 30 mm shaft, narrow section for compact housings. Order the matching in-stock part: 6006-2RS.

Other bearing types on these machines

Not every bearing on a combine is a standard 6-series deep groove ball bearing. The parts below use different dimension systems and are matched by part number or by the old bearing itself; do not substitute a 6-series size for these:

How to order

Send the three boundary sizes (bore × OD × width) read from the old bearing, or a photo of the old bearing with its number, plus the machine brand and model and the quantity. Standard general-purpose bearings fit across brands where the three sizes match; for engine internals, gearbox and header parts, match the exact part number from the parts book. One parts list returns one consolidated quote, with original, high-grade and economy tiers available for fast-moving items.

For the wear parts that fail first each season, see the when-to-replace wear parts guide; bearing and seal fitment on the header, feeder and threshing systems are covered in the header system guide and the threshing and cleaning guide. Brand-specific parts catalogs with exploded views are on the catalog download page.

FAQ

What size is a 6304 bearing?
20 mm bore × 52 mm outside diameter × 15 mm width (ISO 15). The sealed 6304-2RS keeps the same body dimensions.
How do I know which bearing fits my combine?
Read the bore, outside diameter and width from the old bearing, together with the number on the seal; match these three sizes and the suffix, then confirm against the parts book or BOM before ordering.
Do these bearings fit Kubota, FM World, Yanmar, Lovol and Zoomlion?
Standard deep groove ball bearings are general-purpose and can be used across brands where the three sizes match; always confirm fitment against the old bearing and the parts book rather than the brand name alone.

Leave a Comment

Your email address will not be published. Required fields are marked *