Bearing 6304-2RS — 20 x 52 x 15 mm for FM WORLD 4LZ-4.0E Combine Harvester
The 6304-2RS is built around a 20 mm bore and opens out to 52 mm with a 15 mm width. On a shaft this small that is a heavy ring section, so the FM WORLD 4LZ-4.0E uses it where a 20 mm shaft sees more impact than a thin bearing could survive. The two rubber seals hold the grease for the life of the part.
Specifications
| Part number | 6304-2RS |
|---|---|
| Type | single-row deep groove ball bearing, rubber sealed on both sides |
| Bore diameter | 20 mm |
| Outside diameter | 52 mm |
| Width | 15 mm |
| Weight | 0.14 kg |
| Fits | FM WORLD 4LZ-4.0E Combine Harvester |
| Availability | In stock, ready to ship |
Bearing type and load capacity
Numbering here is easy to misread: the leading 63 marks the heavy deep groove family, not the bore. At 20 mm bore this bearing runs larger balls and a thicker outer ring than a 6204 on the same shaft, which is where its shock capacity comes from on a vibrating machine.
6304-2RS against the 6204 on the same 20 mm shaft
The 6204 is 20 x 47 x 14 mm, so the 6304 adds 5 mm of outside diameter and 1 mm of width on an identical journal. A housing bored to 47 mm cannot accept the 52 mm part, and there is no reason to open it up: fit the number the housing was machined for, and only move to the 6304 where that heavier rating is actually specified.
Fitting notes
Heat the bearing before a tight fit and press on the inner ring only. Forcing a cold 52 mm ring onto the journal bruises the raceway and leaves a sealed unit that cannot be relubricated to recover.
Before you fit it
Shaft and housing
Check the 20 mm journal for a wear ridge before the new ring goes on. A scored journal will work the seal lip loose and let chaff into a bearing that is greased for life.
Signs it needs replacing
- Knocking that follows the cutterbar rather than shaft speed
- Grease washed into a dark ring around the seal on the loaded side
- Side play felt when the 20 mm shaft is rocked by hand
- A polished or stepped journal where the old inner ring turned
Compatibility and cross reference
Models covered
This is the sealed 6304 listed for the FM WORLD 4LZ-4.0E; order it against the 20 mm journal and the 52 mm housing.
Confirming the right part
Match the number on the old part and measure the housing at 52 mm. A 47 mm reading means the position takes a 6204, not this 6304.
Questions we are asked about this part
Is the 6304 interchangeable with a 6204?
No. They share the 20 mm bore but the outside diameters differ, 52 versus 47 mm, so the housing decides which one fits.





