HST Assembly 5H470-1100-5 for Kubota DC70 Hydrostatic Drive
The Kubota DC70 catalogue lists part number 5H470-1100-5 as ASSY HST. The live product record places it in the HST & Hydraulic Drive category and identifies the current product as an HST hydraulic assembly.
HST Assembly Data
| Part Number | 5H470-1100-5 |
| Component | HST assembly |
| Machine | Kubota DC70 |
| System | HST and hydraulic drive |
| Catalogue Name | ASSY HST |
| Selection Basis | Part number and HST position |
Hydrostatic Drive Function
A hydrostatic transmission uses hydraulic power to transfer drive from the engine side to the machine’s drive system. The assembly should be identified by the DC70 catalogue number rather than by a generic pump or motor description.
Comparing the HST Assembly
Compare the removed assembly by 5H470-1100-5 and its HST mounting position. The catalogue does not provide pressure settings, flow values, internal parts, dimensions, or weight, so those details are not estimated.
Verified DC70 Fitment
This replacement is verified for Kubota DC70 only. The previous broad cross-model list is not carried forward.
Before replacing the HST, inspect the hydraulic fluid condition, filters, linkage, mounting area, and related transmission parts. External fluid or control problems can produce symptoms similar to an HST fault.
HST Fault Inspection Points
- Weak or inconsistent drive after fluid and filters are checked
- Slow response to the HST control after linkage adjustment is inspected
- Abnormal noise from the HST area after mounting and fluid level are checked
- Machine speed cannot be maintained after other hydraulic causes are diagnosed
Ordering Information for the HST Assembly
Mounting: Kubota DC70 HST and hydraulic drive.
Confirmation: Confirm 5H470-1100-5 and verify the part is the complete HST assembly in the DC70 drive position.
Dimensions to match: No verified pressure, flow, dimension, or internal component list is recorded. Match the part number and mounting position.
Related DC70 Transmission Parts
HST Assembly Questions
Is this a complete HST assembly?
The DC70 catalogue identifies the component as ASSY HST. No additional internal parts should be assumed from this listing.
Should filters or fluid be checked before replacement?
Yes. Fluid condition, filters, linkage, and external hydraulic faults should be assessed before concluding the HST assembly must be replaced.
Can a transmission shaft problem mimic an HST fault?
Yes, related shafts and gears should be inspected when drive performance is weak or inconsistent.
Identification of 5H470-1100-5 before ordering
Use 5H470-1100-5 when the DC70 HST assembly is identified as the required replacement after proper diagnosis. Verify the part number, machine, and mounting position before ordering.




