Auger Chain Assembly 5T077-4930-0 for Kubota DC70 Header Conveyor
Replacement auger chain assembly for the Kubota DC70 header conveyor. The DC70 catalogue lists 5T077-4930-0 in the auger chain assembly section, alongside the tension sprocket and related chain hardware.
Auger Chain Data
| Part Number | 5T077-4930-0 |
| Component | Auger Chain Assembly |
| Conveyor Group | Auger chain assembly |
| Verified On | Kubota DC70 |
| Brand Line | Kubota |
| Selection Basis | Part number, auger chain route and guide alignment |
Auger Chain Role in Material Transfer
This chain operates in the auger chain assembly and moves material through the auger section. It must align with the sprockets and follow the exact chain path shown for the DC70 assembly.
Auger and Feeder Chain Comparison
Compare 5T077-4930-0 with the removed chain and the auger chain route. Do not substitute the feeder drive chain because the two assemblies have different part numbers and operating positions.
DC70 Auger Chain Fitment
This page supports the verified Kubota DC70 application only. No material grade, chain length, or cross-model fitment is added without source evidence.
The tension sprocket and chain guides should be inspected at the same time. Worn guides can make a replacement chain run off line or wear unevenly.
Auger Chain Wear Checks
- Stiff or crooked links
- Pin wear and visible elongation
- Rust or corrosion that restricts movement
- Chain jumping, noise, or poor material transfer
Ordering Information for the Auger Chain
Mounting: Kubota DC70 header conveyor auger chain assembly.
Confirmation: Confirm 5T077-4930-0 and verify the chain belongs to the auger assembly, not the feeder drive.
Dimensions to match: No verified chain length is recorded. Match the part number, link arrangement, and auger chain path.
Related Auger Chain Components
Auger Chain Questions
Does this include the complete auger?
No. The product is the auger chain assembly, not a complete auger housing or full auger mechanism.
Is the tension sprocket included?
No. The tension sprocket has its own part number and should be inspected separately.
Identification of 5T077-4930-0 before ordering
Use 5T077-4930-0 when the DC70 auger chain is worn, stiff, elongated, or no longer tracking correctly. Verify the part number and chain path before ordering.





