,

Gear Chamber Cover Gasket (N85T-12003)

Gear Chamber Cover Gasket (N85T-12003). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Gear Chamber Cover Gasket N85T-12003 for FM WORLD 6.0P

This is the gear chamber cover gasket part number N85T-12003 for the FM WORLD 4LZ-6.0P, a 50 × 270 × 1 mm seal weighing 0.02 kg. It seals the cover of the timing gear chamber to the engine block.

Specifications

Part numberN85T-12003
TypeGear chamber cover gasket
Size50 × 270 × 1 mm
Weight0.02 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

The timing gears run in a bath of engine oil, and this gasket keeps that oil inside the chamber while sealing dirt out. It follows the full perimeter of the cover, compressing along the joint so oil cannot weep past the bolts or the edges. Unlike the intake gasket, its main job is retaining oil rather than controlling air, which is why a failure shows as a leak rather than a running fault.

Cover leak against a loose bolt

Oil under the cover can come from a gasket that has failed or simply from fixings that have loosened, so confirm the torque first and clean the area to see where the oil begins. A seam that still weeps after the bolts are set points to the gasket.

Fitting notes

Drain or lower the oil level as needed, remove the cover and scrape both faces clean before fitting the new gasket dry. Refit the cover and tighten the fixings in sequence to the service manual so the seal is compressed evenly.

Before you fit it

Inspect the cover lip for dents and the block face for deep scratches, and never use a thick sealant that could squeeze inside and block an oil way. The locating sleeve should be in place before the cover is offered up.

Signs this part needs replacing

  • Oil weeping or running down the face of the cover
  • Brittle, torn or oil-soaked gasket that no longer seals
  • Oil drops forming under the gear chamber after standing
  • A cover that seeps even after the bolts are torqued
  • Hardened sections that crack when the cover is removed
  • Slow oil loss traced to the chamber rather than a shaft seal

Compatibility and cross-reference

Where it fits

Fitted between the timing gear chamber cover and the block of the FM WORLD 4LZ-6.0P.

Confirming the correct part

Confirm by part number N85T-12003 and the perimeter shape and bolt pattern of the cover.

Reading the old part

Match the outline to the cover, checking every bolt hole lines up before the gasket is compressed.

Frequently asked questions

What is this gasket sealing?

It seals the timing gear chamber, whose gears run in engine oil, so a failed gasket leaks oil from the cover rather than causing an air leak.

Should sealant be added to guarantee the joint?

The gasket is designed to seal on its own between flat faces; excess sealant can squeeze into the chamber and block oil passages, so fit it dry and rely on even torque.

Related parts