,

Locating Sleeve Of Gear Chamber (N85-03001)

Locating Sleeve Of Gear Chamber (N85-03001). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Locating Sleeve N85-03001 for FM WORLD 6.0P

This is the gear chamber locating sleeve part number N85-03001 for the FM WORLD 4LZ-6.0P, a small Φ12 / φ9 / H15 mm part weighing 0.01 kg. It positions the gear chamber components precisely on the engine.

Specifications

Part numberN85-03001
TypeLocating (doweling) sleeve
Outer / innerΦ12 / φ9 mm
Height15 mm
Weight0.01 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What this part does

The sleeve acts as a precision dowel: its outer diameter locates in one bore and its inner diameter over the matching feature, holding the gear chamber cover and housing in exact alignment independent of the bolts. Fixings can move slightly under load, so the sleeve carries the real positioning work and keeps the gears and seal faces concentric.

Alignment fault against a worn gasket

A missing or loose sleeve lets the cover shift even when the gasket is new, which shows as a recurring leak or gear noise. Confirm the sleeve is present and tight before blaming the seal.

Fitting notes

Press the sleeve squarely into a clean bore using a flat driver rather than hammering it, and check it sits to the correct height. The cover should then locate over it without being forced.

Before you fit it

A sleeve that is loose in its bore or worn on the diameter has lost its locating function and should be replaced, and the bore itself should be checked for wear. Keep it well oiled during assembly.

Signs this part needs replacing

  • A loose sleeve that no longer holds alignment
  • Worn or scored outer and inner diameters
  • Recurring oil leaks from a cover that shifts
  • Gear noise after the chamber was reassembled
  • A bent or distorted sleeve from being forced
  • A sleeve lost during service, leaving the joint un-located

Compatibility and cross-reference

Where it fits

Fitted between the gear chamber housing and cover of the FM WORLD 4LZ-6.0P.

Confirming the correct part

Confirm by part number N85-03001 and the Φ12 / φ9 / 15 mm dimensions.

Reading the old part

Match the diameters and height to the bores, and check the sleeve is a firm fit rather than relying on appearance.

Frequently asked questions

What does the locating sleeve do?

It works as a precision dowel that holds the gear chamber parts in exact alignment, while the bolts only clamp them together.

Why can a new gasket still leak?

If the locating sleeve is missing or worn the cover can sit slightly off, breaking the seal; alignment must be correct before the gasket can do its job.

Related parts