Main Bearing Kit 4L68 — Crankshaft Shells for FM WORLD 4LZ-6.0P (Ruilong) Combine Harvester
This kit holds the engine main bearings, pairs of split half-shells that support the crankshaft in the cylinder block of the 4G33TC engine in the FM WORLD 4LZ-6.0P. They are plain bearings that ride on an oil film rather than rolling elements, and the kit groups the two part numbers 4L68-030006 and 4L68-030008 needed for the job.
Specifications
| Part numbers | 4L68-030006 & 4L68-030008 (kit) |
|---|---|
| Type | Split half-shell crankshaft main bearings |
| System | 4G33TC engine, plain oil-film bearings |
| Package dimensions | 76 x 38 x 23 mm |
| Weight | 0.1 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) Combine Harvester |
| Availability | In stock, ready to ship |
Bearing type and load capacity
Each shell is a steel backing with a thin anti-friction lining, seated half in the block and half in the main cap. There is no metal-to-metal contact in service: a pressurised oil film separates the shell from the rotating journal, so correct clearance and clean oil are what determine the life of the part.
Plain main bearings against a rolling bearing
A rolling bearing uses balls or rollers and can run with little lubricant, whereas a main bearing shell is a fixed split liner that depends entirely on the oil film and is sized to the crankshaft journal. The two are not interchangeable and are not chosen the same way: shells are selected by standard or undersize grade to match the journal, then torqued in the caps, never pressed on like a rolling bearing.
Fitting notes
Keep the backs of the shells dry and clean so they seat fully in their housings, then coat the bearing surface and the crankshaft journals with clean engine oil or assembly lube before the crankshaft goes in. Confirm the oil holes align and torque the caps to specification in sequence. The correct clearance is set by the shell grade, so measure the crankshaft before choosing standard or undersize parts, and never dry-start the engine.
Before you fit it
Shaft and housing
Measure every crankshaft journal and check the block and cap seats are clean and unmarked before the shells go in. A damaged seat or a misaligned oil hole will destroy the oil film regardless of shell grade.
Signs it needs replacing
- Crankshaft knock from excessive clearance as the lining wears
- Shiny or wiped lining where the oil film broke down
- A spun shell that has turned in its housing and blocked the oil feed
- Metal flakes in the engine oil or a sudden drop in oil pressure
Compatibility and cross reference
Models covered
This main bearing kit is listed for the 4G33TC engine in the FM WORLD 4LZ-6.0P.
Confirming the right part
Order by the two part numbers in the kit and select the grade, standard or undersize, from the measured journals. The kit is identified by the 4L68 numbers and the engine application.
Questions we are asked about this part
How do I choose standard or undersize shells?
Measure the crankshaft journals first. Standard shells fit a standard journal; if the journals have been machined or are worn, the matching undersize grade is required. Do not select a grade without measuring.





