Oil Seal MC60×90×18 for FM WORLD 6.0P
This is the largest oil seal in the set, fitting a 60 mm shaft on the FM WORLD 4LZ-6.0P, with a 90 mm outer diameter and an 18 mm wide body, at 0.01 kg. The wide case carries the lip and reinforcement needed around a substantial rotating shaft.
Specifications
| Part number | MC60×90×18 |
|---|---|
| Type | Wide rotating-shaft oil seal |
| Shaft diameter | 60 mm |
| Outer diameter | 90 mm |
| Width | 18 mm |
| Weight | 0.01 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
The 18 mm wide body gives the lip and case a long locating surface in the 90 mm bore, which helps a large seal stay square around a 60 mm shaft. The garter spring keeps the elastomer lip under even radial pressure so lubricant is retained as the shaft turns. A thin oil film under the lip is normal and protects the rubber from dry friction. On a seal this size the main service risks are a worn shaft track and a case that is not pressed fully home, either of which leaves a path for oil even though the lip itself is new.
Same width as the combination seal, different scale
The combination seal is also 18 mm wide but fits a 29 mm shaft and a 78 mm bore with multiple lips. This part is a single rotating-shaft seal at 60 by 90 mm. Matching only the 18 mm width would be a mistake, because the shaft and bore are far larger here.
Fitting notes
Use a driver that covers the wide case and press it fully and square into the 90 mm bore. Lightly coat the lip and the clean shaft with the housing lubricant, keep the spring facing the oil, and protect the lip while crossing splines or threads. Shaft and bore checks follow the service manual.
Before you fit it
Inspect the 60 mm shaft for a polished groove or scoring and confirm the bore is clean and round. A large seal cannot compensate for a worn shaft track or a bore with a damaged seat.
Signs this part needs replacing
- Oil escaping around the large shaft and wetting the housing
- A case left partially seated or pressed in crooked
- A hardened or cracked lip on the wide body
- A worn groove in the shaft that the new lip cannot follow
Compatibility and cross-reference
Where it fits
Wide rotating-shaft position on the FM WORLD 4LZ-6.0P, around a substantial 60 mm shaft in a 90 mm bore.
Confirming the correct part
Confirm by the 60 mm shaft, 90 mm outer diameter and 18 mm wide body, part number MC60×90×18.
Reading the old part
The large 60 by 90 mm footprint and 18 mm case identify this seal; verify the shaft and bore dimensions rather than the width alone.
Frequently asked questions
Is this the same as the 18 mm combination seal?
They share a width but nothing else: this fits a 60 mm shaft and 90 mm bore as a single rotating-shaft seal, while the combination part is 29 by 78 mm with multiple lips.
What matters most when fitting a seal this large?
Pressing the wide case fully and square, and checking the shaft track first. Most leaks on large seals come from a crooked seat or a worn shaft, not the new lip.





