Two-Way Solenoid Valve (235 x 200 x 180 mm) for FM WORLD 4LZ-6.0P
This 14.8 kg two-way solenoid valve uses an electrical coil to open and close a hydraulic path without a manual lever.
Solenoid valve data
| Drawing number | W2.5DD-05DK-21-01 |
| Component | Two-way solenoid valve |
| Overall dimensions | 235 x 200 x 180 mm |
| Mass | 14.8 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Opening the path by electrical signal
On an electrical command the coil moves the internal element, linking the two ports; when the signal ends, the valve returns to its resting state.
Electrical solenoid versus manual spool valves
The slide and unloading valves are moved by hand, while this one switches on an electrical signal, so the coil and connector must be checked as well.
Installing the solenoid valve
Fix the body in place, attach the two hydraulic lines, and seat the electrical connector firmly so the coil receives a clean signal.
Command the valve and listen for a firm switch, then confirm the driven function actually moves rather than relying on the click alone.
Conditions that stop it switching
- Coil open or burned with no switching
- Element stuck from contamination
- Loose or corroded connector
- Oil leaking at the ports
- Harden seals weeping
- Signal present but no flow
Ordering details
Mounting: Two-way solenoid valve of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Quote the drawing number and verify the 235 x 200 x 180 mm body and coil.
Dimensions to match: Check the two-port layout and the electrical connector against the old valve.
The manual and relief valves
Questions buyers ask
Does a click mean the valve works?
Not always; the coil may click while a stuck element still blocks the flow.
What fails most often?
The coil or its connector, followed by contamination that jams the element.
Identification of W2.5DD-05DK-21-01 before ordering
Fit this solenoid valve when the coil fails, the element sticks or the function will not switch; a valve that responds to every command can remain.




