Reel Unloading Controller (355 mm) for FM WORLD 4LZ-6.0P
This is the operator controller that commands the reel and unloading functions from the cabin. It is 355 x 125 x 70 mm and light at 0.35 kg, sending the signal that the hydraulic valve then carries out.
Controller dimensions
| Part number | W2.5C-06BN-01-06A |
| Part type | Reel unloading controller |
| Dimensions | 355 x 125 x 70 mm |
| Weight | 0.35 kg |
| Location | Cabin control |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
Sending the reel command
The controller translates the operator’s lever or switch input into the command that reaches the reel circuit, so a clear, consistent input is what makes the unloading action respond the same way each time.
Controller versus hydraulic valve
It is the command unit and not the hydraulic valve that moves oil; if the valve works when commanded directly but the cabin input does nothing, the controller is the likely part.
Connecting the controller
Connect the controller to its harness with the key off and confirm the connector seats and locks. Verify each position gives the correct command before reassembling the cabin trim.
Work the control through every position and check for a neutral detent and a clean response, with no command sent when the control is released.
Signs of a worn controller
- No output despite a working valve and supply
- Intermittent response from a worn contact
- A loose lever or a lost detent
- Commands that stick or do not return to neutral
- Connector corrosion or a damaged harness pin
- One position failing while others work
How to order
Mounting: Cabin reel and unloading control on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number and confirm the 355 x 125 x 70 mm size and the connector.
Dimensions to match: Check the dimensions, the connector pinout and the control positions against your old unit.
Reel control and valve parts
Common questions
How do I tell whether the controller or the valve is faulty?
If the valve responds to a direct command but the cabin control gives nothing, suspect the controller; if the command is present but the reel drifts, suspect the valve.
Is this a hydraulic part?
No, it is the cabin control that sends the command; the hydraulic work is done by the separate reel valve.
Identification of W2.5C-06BN-01-06A before ordering
Replace this controller when the command is absent or intermittent while the valve and supply are sound; a controller that gives a clean signal in every position can stay.





