,

Main Handle (W2.5DA-07-02-28)

Replacement part for FM WORLD 4LZ-6.0P. Verify fitment by part number W2.5DA-07-02-28 and contact us for ordering support.

Main Handle W2.5DA-07-02-28 (740 x 70 x 60 mm, 0.35 kg) for FM WORLD

The W2.5DA-07-02-28 main handle is an operator control measuring 740 x 70 x 60 mm and weighing 0.35 kg, serving as a central control interface for the connected cable circuits.

Main handle data

Part numberW2.5DA-07-02-28
ComponentMain handle
Overall dimensions740 x 70 x 60 mm
Mass0.35 kg
LocationOperator station
FunctionManual control input

Collecting operator inputs

The handle gives the operator a fixed position for manual control movement. Its connected cables transfer the selected movement to the machine controls.

The handle and the individual cables

The handle is the operator interface. The individual cables are separate replaceable parts, so a worn cable should not be confused with a damaged handle assembly.

Fitting the main handle

Disconnect attached fittings carefully and retain the original fasteners. Fit the replacement in the same mounting position and verify each connected control has free movement.

Check clearance around the full handle travel. Reconnect the cables only after the handle is securely mounted, then test each control without forcing the mechanism.

Handle wear and lost motion

  • Worn pivot creating play
  • Cracked handle housing from impact
  • Loose mounting affecting control position
  • Corroded attachment points
  • Worn grip or detent
  • Misaligned cable connections causing stiff operation

Ordering checks

Mounting: Manual operator station used on FM WORLD 4LZ-6.0P combines.

Confirmation: Order by W2.5DA-07-02-28 and verify the 740 x 70 x 60 mm dimensions and 0.35 kg mass.

Dimensions to match: Compare the mounting pattern, connected cable positions, pivot and handle travel with the removed unit.

Cables connected to the operator handle

Main handle questions

Are the cables included with this handle?

No. This listing is the main handle; the connected control cables are separate parts.

What causes excessive play in the handle?

Pivot wear, loose fasteners or worn attachment points can create lost motion.

Identification of W2.5DA-07-02-28 before ordering

Replace the main handle when the pivot or housing is worn; first confirm that stiffness is not caused by an attached cable or its adjustment.

Request a Quote Now