Upper Sieve B (760 mm) for FM WORLD 4LZ-6.0P
Working in the cleaning shoe, this 760 x 380 x 68 mm upper sieve at 5.6 kg carries the separation on after the A sieve.
Envelope of the sieve
| Drawing number | W3.5H-02HA-13-01-10-00 |
| Component | Upper sieve B |
| Envelope | 760 x 380 x 68 mm |
| Mass | 5.6 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Continuing the separation
After the A sieve, this B sieve gives the grain a second pass, and the frame has to stay square so the grain drops at the right point.
Reading B against A
Read the envelope and the position: the B sieve is shallower and sits later in the shoe, so it cannot be mistaken for the A sieve.
Locating the sieve
Drop the sieve onto its mounts and bring it into line, then confirm the swing is free and read the seal.
Turn the shoe and watch the grain move across the B sieve without building up.
Why it would be scrapped
- Frame opened or twisted
- Openings worn through
- Mounts worn loose
- A seal seam
- Material building up
- Rust across the frame
Before you order
Mounting: Upper B sieve of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Send the drawing number and the 760 mm envelope and note the B fit.
Dimensions to match: Measure the old sieve and its mounts and compare them against this part.
Rear sieve and wind shield
Questions from buyers
Will it seat in place of A?
It will not; the envelope and the position are specific.
At what point does it work?
It carries the separation on after the A sieve.
Identification of W3.5H-02HA-13-01-10-00 before ordering
Order this B sieve only for an opened frame, worn openings or loose mounts; a firm sieve should be kept.




