,

Reel Valve (W2.5DD-05DC-15-01)

Part W2.5DD-05DC-15-01. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Reel Hydraulic Valve (185 mm) for FM WORLD 4LZ-6.0P

This hydraulic valve directs oil to the reel circuit on the FM WORLD 4LZ-6.0P, controlling the reel’s hydraulic functions. It measures 185 x 85 x 80 mm and weighs 2.8 kg, mounted on the reel hydraulic line.

Valve dimensions

Part numberW2.5DD-05DC-15-01
Part typeReel hydraulic valve
Dimensions185 x 85 x 80 mm
Weight2.8 kg
CircuitReel hydraulics
FitsFM WORLD 4LZ-6.0P (Ruilong)

What the reel valve does

When the operator commands the reel, the valve routes pressurised oil to the correct port and blocks it when the command is released, so the reel responds and holds its position.

Hydraulic valve versus controller

This is the hydraulic valve that moves the oil; the separate controller sends the command. Replacing the controller will not fix an internal oil leak, and a new valve will not help a faulty signal.

Fitting the valve

Clean the ports before fitting and connect the hydraulic lines to their marked positions, then check for external leaks at the fittings. Any internal adjustment should follow the service manual.

After fitting, cycle the reel through its full range and confirm it moves smoothly and holds without drift. Do not tighten the fittings beyond a sound seal.

Symptoms of a failing valve

  • External oil seepage at the valve or ports
  • Reel drift that does not hold position
  • Slow or no response to a command
  • A sticky or jerky movement
  • Oil contamination showing at the valve
  • Chatter or noise from the reel circuit

Ordering details

Mounting: Reel hydraulic circuit on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Quote the part number and confirm the 185 x 85 x 80 mm envelope and the port layout.

Dimensions to match: Check the dimensions, the port positions and the reel circuit against your removed valve.

Reel hydraulic and control parts

Buyer questions

Should I replace the controller at the same time?

Not automatically; the valve moves the oil while the controller commands it, so confirm which circuit is at fault before ordering.

Can a valve cause the reel to drift?

Yes, internal leakage or a weak seal can let the reel creep after the command is released, which is a typical valve symptom.

Identification of W2.5DD-05DC-15-01 before ordering

Fit this valve when the reel drifts, leaks externally or fails to respond despite a good command; do not open a sound valve on suspicion alone.

Request a Quote Now