,

Thermostat (03020256)

Thermostat (03020256). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Thermostat 03020256 for FM WORLD 6.0P

This is the thermostat part number 03020256 for the FM WORLD 4LZ-6.0P, a coolant valve with a recorded size of 430 × 105 × 64 mm and a weight of 0.2 kg. It controls when coolant is sent to the radiator.

Specifications

Part number03020256
TypeWax-pellet coolant thermostat
Recorded size430 × 105 × 64 mm
Weight0.2 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

A wax-filled element stays closed when the engine is cold, so coolant circulates through the bypass and the engine warms up quickly. As the coolant reaches working temperature the wax expands and opens the valve, directing flow through the radiator. The thermostat therefore balances fast warm-up against steady cooling, and it opens and closes continuously to keep the engine in its working range.

Stuck closed against stuck open

A valve stuck closed blocks the radiator and causes rapid overheating, while one stuck open sends coolant to the radiator all the time, leaving the engine slow to warm and running too cool. The two failures give opposite temperature symptoms.

Fitting notes

Fit the thermostat with the correct orientation and the new seal or gasket, seating it in the housing as shown in the service manual, then refill and bleed the coolant. Installing it backwards or without the seal causes leaks and poor control.

Before you fit it

Before fitting, verify the new valve opens and closes smoothly and the housing face is clean. A thermostat should be replaced whenever the coolant is drained for a related repair, rather than reusing an old one.

Signs this part needs replacing

  • Stuck closed, causing overheating with little or no radiator flow
  • Stuck open, causing slow warm-up and a persistently cool engine
  • Intermittent opening that makes the temperature fluctuate
  • A leaking seal or gasket at the housing
  • Poor heater output and low running temperature from an open valve
  • The valve failing to close fully, extending the warm-up time

Compatibility and cross-reference

Where it fits

In the coolant housing of the FM WORLD 4LZ-6.0P, between the engine and the radiator inlet.

Confirming the correct part

Confirm by part number 03020256, the valve diameter and the housing fit.

Reading the old part

Recognise it by the wax element and spring valve, and match the flange and seal to the old unit.

Frequently asked questions

Why keep the thermostat closed on a cold engine?

Closing the radiator path keeps coolant moving through the bypass so the engine reaches its working temperature quickly, which reduces wear and helps the heater and combustion run correctly.

How does the thermostat know the temperature without electronics?

It uses a wax pellet that expands as it heats and contracts as it cools, mechanically opening and closing the valve against a spring.

Related parts