Grain Tank Alarm (260 x 70 x 40 mm) for FM WORLD 4LZ-6.0P
This 0.32 kg audible alarm, 260 x 70 x 40 mm, warns the operator when the grain tank reaches its full level.
Alarm reference data
| Drawing number | W2.5DA-05-01-20-02 |
| Component | Grain tank alarm |
| Dimensions | 260 x 70 x 40 mm |
| Mass | 0.32 kg |
| Function | Full-tank audible warning |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Warning of a full tank
When the tank fills to its limit, this alarm sounds so the operator stops feeding grain and avoids overloading or spilling.
Alarm versus the level sensor
The sensor measures the level, while this alarm is the audible warning the operator hears; they work together but are separate parts.
Fitting the alarm
Mount the alarm in its bracket, connect the plug cleanly, and check the wiring is secured away from moving parts.
Test the full-tank circuit and confirm the alarm sounds clearly at the operator station.
Reasons it goes silent
- No sound from the internal buzzer
- Corroded connector or wiring
- Loose mounting and vibration
- Broken wire from chafing
- Water entering the housing
- Intermittent alarm from a poor contact
What to verify
Mounting: Grain tank alarm of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Quote the drawing number and confirm the 260 x 70 x 40 mm alarm.
Dimensions to match: Match the connector and mounting bracket to the old alarm.
Sensor and tank parts
Common questions
Does it measure the grain level?
No, it gives the audible warning; the sensor measures the level.
Why would it stop sounding?
A failed internal buzzer or a corroded connector is the usual cause.
Identification of W2.5DA-05-01-20-02 before ordering
Replace this alarm when it stays silent or sounds intermittently; check the sensor and wiring before ordering.





