Grain Tank Level Sensor JCK-1 (300 x 96 mm) for FM WORLD 4LZ-6.0P
This 0.13 kg level sensor, 300 mm long with a 96 mm diameter, detects the grain level inside the tank and feeds the full-tank warning.
Sensor reference data
| Drawing number | JCK-1 |
| Component | Grain tank level sensor |
| Dimensions | 300 x Phi96 mm |
| Mass | 0.13 kg |
| Function | Grain level detection |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Detecting the grain level
Mounted in the tank, the sensor responds as grain rises against it and signals the warning circuit when the tank is full.
Sensor versus the alarm
The alarm is the audible output, while this sensor is the input that detects the level; the two are not interchangeable.
Fitting the level sensor
Seat the sensor through its tank opening, fit the seal, and connect the plug without pinching the wiring.
Fill or simulate the level and confirm the sensor triggers the warning at the correct point.
Reasons for false readings
- Probe fouled with dust or chaff
- False readings from a dirty face
- Corroded connector or wiring
- Internal sensing element failed
- Seal leaking at the opening
- Intermittent signal from vibration
Checks before ordering
Mounting: Grain tank level sensor JCK-1 of FM WORLD 4LZ-6.0P (Ruilong).
Confirmation: Quote the JCK-1 number and confirm the 300 x Phi96 mm sensor.
Dimensions to match: Match the tank opening, seal and connector to the old sensor.
Alarm and tank parts
Buyer questions
What does it detect?
The grain level inside the tank, to trigger the full warning.
Why might it give false readings?
A fouled probe or a corroded connector disturbs the signal.
Identification of JCK-1 before ordering
Replace this sensor when readings are false or the full warning fails; clean the probe and check the wiring before ordering.





