,

Impurity Auger Chain 415S-1-48

Impurity auger chain in the dirty return. Part W2.5-02-02-11-06 (415S-1-48). In-stock replacement for the FM WORLD 4LZ-6.0P header and threshing system.

Impurity Auger Chain (415S-1-48) for the FM WORLD 6.0P

This chain drives the impurity auger in the return that carries chaff and debris away. It has 48 joints and weighs 0.35 kg. It works in the dirtiest position on the machine, and that environment, rather than the load, decides how it fails.

Specifications

Part NumberW2.5-02-02-11-06 (415S-1-48)
Part TypeImpurity auger chain
Joints48
Weight0.35 kg
EnvironmentDusty, debris return
FitsFM WORLD 4LZ-6.0P (Ruilong)
AvailabilityIn stock, ready to ship

What this part does

Dust and fine plant material work into the hinges and act as an abrasive paste, so this chain wears its pins and bushes faster than the clean runs. The failure still shows as elongation and jumping, but it is often preceded by stiff links caused by packed debris rather than by rust. Cleaning and lubricating the chain at service intervals postpones this, but once the hinges are worn the chain cannot be restored, and a jumping chain in the return can stop the auger and choke the cleaning system.

The dirty chain against the clean elevator chain

The grain lifting chain has 42 joints and works in a cleaner enclosed elevator; this one has 48 joints and lives in open dust. Similar size, different environment, different part number. Match the joint count and the number, and do not assume the two chains share a service life simply because they sit near each other.

Fitting notes

Clean the sprockets and the guard before fitting, because debris left in the housing will find the new chain immediately. Check the sprocket teeth for hooking, flex the chain to expose stiff links, and confirm the auger turns freely after fitting. Tension follows the service manual, and the connecting link follows the standard orientation.

Before you fit it

When the chain is off, clear the housing of packed chaff. A clean housing is the single biggest factor in the life of this particular chain.

Signs it needs replacing

  • Stiff links from debris packed into the hinges
  • Jumping that stops the auger or chokes the cleaning system
  • Elongation beyond the adjustment travel
  • Abrasive wear and dark paste at every joint

Compatibility and cross reference

Models covered

The drive chain of the impurity auger in the cleaning return of the FM WORLD 4LZ-6.0P. A 48-joint chain in a dirty environment, ordered by its part number.

Confirming the right part

Confirm 415S-1-48 on 48 joints and 0.35 kg. The 42-joint elevator chain is a different part in a different run.

Reading the old part

Count the joints and look at the hinge condition. Heavy dust packing and a 48-joint count identify this chain even without a readable number.

Questions we are asked about this part

Can a stiff chain be cleaned and put back?

If the hinges are still within length and not worn, cleaning and lubricating can free debris-stiff links. Once the chain has elongated or the hinges are worn, cleaning does not restore the fit.

Why does this chain wear faster than the others?

Because fine dust enters its hinges and works as an abrasive. Keeping the housing clean and servicing at the manual’s intervals matter more here than on the enclosed elevator chain.

Related parts