Main Chassis Frame (689 kg) for FM WORLD 4LZ-6.0P
This 689 kg welded main frame, measuring 3495 x 1990 x 1038 mm, forms the backbone to which the running gear and all major assemblies are mounted.
Main frame data
| Drawing number | W3.5H-03HA-01-00 |
| Component | Welded main chassis frame |
| Overall dimensions | 3495 x 1990 x 1038 mm |
| Mass | 689 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Primary foundation of the machine
As the primary foundation, this backbone holds the geometry of the whole harvester and distributes engine, threshing and field loads into the axles and tracks.
Main frame against the section frames
Unlike the threshing and rear support frames, which serve one section, this main frame runs the full length and sets the alignment for everything attached to it.
Fitting the foundation frame
Position the foundation frame on the running gear, line up all attachment faces, and torque fasteners to the service manual values.
Once fitted, verify the frame is level and square before mounting the engine and threshing components.
Reasons the frame fails
- Weld seams splitting under repeated loading
- Bolt holes enlarged by constant vibration
- Corrosion weakening the longer members
- Twisted rails after a heavy impact
- Mounting lugs tearing away
- Hairline fatigue cracks near brackets
What to verify
Mounting: Welded main foundation frame of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Quote the drawing number and confirm the 689 kg frame and the 3495 x 1990 x 1038 mm dimensions.
Dimensions to match: Match the full-length dimensions and the pattern of attachment faces to the old frame.
Section and support frames
Common questions
Is this the same as the threshing frame?
No, this is the full-length backbone; the threshing frame only supports the rotor and concave.
Why is frame alignment important?
It sets the geometry for every mounted assembly, so a twisted frame causes uneven wear and poor operation.
Identification of W3.5H-03HA-01-00 before ordering
Select this main frame when the rails twist, welds split or the machine no longer sits square; have a qualified welder inspect any structural repair.





