,

Threshing Frame (W3.5H-02HA-01A-00)

Part W3.5H-02HA-01A-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Threshing Cage Frame (2310 x 1150 x 1300 mm) for FM WORLD 4LZ-6.0P

This welded threshing cage frame, 2310 x 1150 x 1300 mm, supports the cylinder and concave assembly and keeps them in alignment during separation.

Cage frame data

Drawing numberW3.5H-02HA-01A-00
ComponentWelded threshing cage frame
Overall dimensions2310 x 1150 x 1300 mm
MachineFM WORLD 4LZ-6.0P (Ruilong)

Housing the cylinder and concave

The cage surrounds the cylinder and concave, holding the separation parts in the correct position while resisting the shaking loads generated during threshing.

Cage frame against the main frame

This cage is a dedicated section frame for the cylinder, while the main chassis frame is the full-length backbone that supports the whole combine.

Mounting the cage frame

Set the cage on its support rails, align the cylinder and concave locations, and secure the fixings per the service manual.

After assembly, confirm the cylinder and concave stay aligned and the cage does not flex against the rotor.

Reasons the cage fails

  • Weld fatigue around the cylinder supports
  • Cage members bent by impact or overload
  • Bolt holes elongated by vibration
  • Corrosion across the frame
  • Support lugs cracking or tearing
  • Misalignment that lets the cylinder rub

What to verify

Mounting: Welded threshing cage of FM WORLD 4LZ-6.0P (Ruilong) harvesters.

Confirmation: Quote the drawing number and confirm the 2310 x 1150 x 1300 mm cage frame.

Dimensions to match: Match the cage dimensions and the cylinder and concave locations to the old part.

Main and rear frames

Common questions

Is the cylinder supplied with this frame?

No, the cage is the welded support; the cylinder and concave are separate parts.

What causes the cage to misalign?

Bent members, elongated holes or cracked support lugs allow the cylinder to move off position.

Identification of W3.5H-02HA-01A-00 before ordering

Select this cage frame when the supports fatigue or the cylinder loses alignment; inspect the cylinder and concave before ordering.

Request a Quote Now