Rear Support Frame (960 x 610 x 1105 mm) for FM WORLD 4LZ-6.0P
This welded rear support frame, 960 x 610 x 1105 mm, braces the rear of the machine and ties the grain tank and unloading structure to the chassis.
Rear frame data
| Drawing number | W2.5-04G-05YG-00 |
| Component | Welded rear support frame |
| Overall dimensions | 960 x 610 x 1105 mm |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Bracing the tail end
The brace connects the grain tank and unloading assembly to the underframe, keeping the tail end rigid as the tank fills and the auger swings during unloading.
Rear brace versus the chassis
This is a smaller rear brace rather than the main underframe, and it does not carry the rotor; it only stabilises the rear section.
Fitting the rear brace
Lift the brace into the rear mounts, align its connection faces, and tighten the bolts following the service manual.
After fitting, load the rear structure and confirm the brace holds the tank and unloading parts without movement.
Brace and weld wear
- Cracks where the brace meets the chassis
- Welds failing under the filled-tank load
- Connection holes worn elongated
- Rust on the rear members
- Bent braces after impact
- Loose mounts allowing rear flex
Ordering checks
Mounting: Welded rear support brace of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Quote the drawing number and confirm the 960 x 610 x 1105 mm rear frame.
Dimensions to match: Match the brace dimensions and the rear connection faces to the old part.
Chassis and threshing frames
Buyer questions
Does this frame support the rotor?
No, it braces the rear grain tank and unloading structure only.
Why does the rear end flex?
Cracked or loose brace mounts let the tail end move instead of tying it rigidly to the chassis.
Identification of W2.5-04G-05YG-00 before ordering
Choose this rear brace when the connection welds crack or the tail end flexes; check the grain tank and unloading mounts at the same time.





