Fuel Injection Pump 4G33TC-181000Z for FM WORLD 6.0P
This is the fuel injection pump part number 4G33TC-181000Z for the diesel engine in the FM WORLD 4LZ-6.0P, a 310 × 220 × 160 mm unit weighing 7 kg. It meters the diesel, raises it to injection pressure, and sends it to each cylinder at the correct moment.
Specifications
| Part number | 4G33TC-181000Z |
|---|---|
| Type | Diesel fuel injection pump |
| Size | 310 × 220 × 160 mm |
| Weight | 7 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | in stock, ready to ship |
What this part does
Driven by the engine timing gear, the pump uses pumping elements to build high pressure and a control rack to set how much fuel is delivered according to engine speed and load. Delivery valves keep each cylinder’s charge separate and the timing is aligned to the compression stroke, so the same pump handles metering, pressure and timing. The low-pressure feed from the lift pump enters the unit and leaves only when a cylinder is due to fire.
Pump fault against a fuel supply problem
A blocked filter, air in the lines or a weak lift pump can stop fuel reaching the injectors without any fault inside the injection pump. Check the supply, filter and bleed air first, since condemning the high-pressure pump before the feed is sound is a common mistake.
Fitting notes
Fit the pump with the timing marks aligned through the drive coupling and connect the fuel lines and stop control without forcing the unions. The timing and fuel calibration should be set to the service manual, and the system bled of air before the first start.
Before you fit it
Injection-pump internals are precision parts and any reconditioning or recalibration is done on a test bench rather than in the frame. If the old pump has metal debris in its fuel, the lines and tank should be cleaned so a replacement is not damaged by the same contamination.
Signs this part needs replacing
- Hard starting or no start from lost pressure or timing
- Loss of power and slow response as fuel delivery drops
- Rough running or uneven cylinders from mismatched delivery
- Black or white exhaust smoke from incorrect metering
- Fuel leaking into the engine oil or at the pump seals
- Stalling or surging as the governor or rack sticks
Compatibility and cross-reference
Where it fits
Mounted on the engine of the FM WORLD 4LZ-6.0P, driven from the timing gear and feeding the injectors through the high-pressure lines.
Confirming the correct part
Confirm by part number 4G33TC-181000Z, the drive arrangement and the line connections.
Reading the old part
Recognise it by the high-pressure outlets and control rack, and match the drive coupling and unions rather than relying only on the tag.
Frequently asked questions
Does the injection pump just supply fuel like a lift pump?
No. The lift pump only moves fuel at low pressure, while this pump meters the exact quantity, raises it to injection pressure and times each shot to the compression stroke.
Why is air in the fuel system such a common cause of trouble?
The high-pressure elements rely on continuous liquid fuel to build pressure, so trapped air makes delivery weak or erratic. Bleeding the system is the first step before the pump itself is judged faulty.





