,

Supercharger (4G33TC-341000ZZ)

Supercharger (4G33TC-341000ZZ). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Turbocharger 4G33TC-341000ZZ for FM WORLD 6.0P

This is the forced-induction charger part number 4G33TC-341000ZZ for the FM WORLD 4LZ-6.0P, a 200 × 165 × 160 mm unit weighing 4.9 kg. The catalog labels it a Supercharger; on this diesel it is the exhaust-driven turbocharger that pressurises the intake air.

Specifications

Part number4G33TC-341000ZZ
TypeExhaust-driven turbocharger
Size200 × 165 × 160 mm
Weight4.9 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

Hot exhaust gas flows through the turbine housing and spins the turbine wheel, and the shaft it turns drives a compressor wheel at the other end that pushes extra air into the cylinders. With more air forced in, more fuel can burn and the engine produces greater power from the same displacement. The shaft runs in bearings inside the center housing, which are lubricated and cooled by engine oil fed through the oil inlet and drained back to the sump.

Turbo fault against an intake or fuel fault

A leaking intake pipe or intercooler, a restricted filter or a fuel problem can all cause low power that is blamed on the turbocharger. Check the air plumbing and fuel delivery and inspect shaft play before concluding the charger itself has failed.

Fitting notes

Prime the oil feed before first cranking and ensure the oil inlet and return are clear, then fit the turbine and compressor housings to the exhaust and intake without stress. After start-up let it idle before loading, and idle briefly before shutdown so the bearings do not run dry while hot.

Before you fit it

Dirt or a blocked oil return is the fastest way to destroy a turbo, so keep every opening capped during fitting and never crank with the intake pipe off. A unit that has ingested a foreign object will show a chipped compressor wheel and the source of the debris must be found.

Signs this part needs replacing

  • Loss of power and slow acceleration as boost falls away
  • Whining or siren noise from worn bearings or wheel damage
  • Blue smoke and oil consumption from a failed center seal
  • Oil found in the intake or intercooler
  • Excessive shaft play felt between the turbine and compressor
  • Black smoke from air starvation when the compressor is restricted

Compatibility and cross-reference

Where it fits

Mounted on the exhaust manifold of the FM WORLD 4LZ-6.0P, with the compressor outlet to the intake and an oil feed and drain.

Confirming the correct part

Confirm by part number 4G33TC-341000ZZ, the flange arrangement and the oil connections.

Reading the old part

Recognise it by the turbine and compressor housings on a common shaft, and match the flanges and oil ports to the old unit.

Frequently asked questions

What drives the turbocharger?

The engine’s own exhaust gas spins the turbine, so the extra power is recovered from energy that would otherwise go out of the exhaust rather than from a belt.

Why does oil in the intake matter?

The center housing seals keep oil out of the air and exhaust paths, so oil in the intake or intercooler means a seal is failing and the charger will smoke and consume oil.

Related parts