,

Oil Pump Parts (4G33TC-131000B)

Oil Pump Parts (4G33TC-131000B). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Oil Pump 4G33TC-131000B for FM WORLD 6.0P

This is the engine oil pump for the FM WORLD 4LZ-6.0P, a positive-displacement pump 100 × 68 × 85 mm, weight 1.3 kg. It builds the oil pressure that feeds every bearing and lubrication passage.

Specifications

Part number4G33TC-131000B
TypeEngine oil pump (positive displacement)
Size100 × 68 × 85 mm
Weight1.3 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

As the engine drives the pump, the gears or rotors trap oil and move a fixed amount of it per revolution into the galleries, building pressure. A relief valve opens if pressure rises too high and returns the excess. The pump is the source of the pressure that the bearings ride on, so internal wear that enlarges the clearances lets oil slip back and lowers the pressure, especially at low engine speed.

Oil pump against the oil filter

The filter only cleans the oil the pump moves. The pump is the part that creates the flow and pressure, so a low-pressure reading with a clean filter points at the pump or its clearances rather than the filter.

Fitting notes

Prime the pump with clean oil before fitting and use a new gasket, then check the pickup tube and screen are sealed and clear. Confirm the oil pressure after start-up against the service manual.

Before you fit it

Inspect the drive and the pickup screen for wear and debris, and check the relief valve moves freely. A blocked pickup or sheared drive can stop oil flow without an external leak.

Signs this part needs replacing

  • Low oil pressure or a warning light, especially at idle
  • Worn gears or rotors with increased internal clearance
  • Noise from the pump drive
  • Blocked pickup screen or stuck relief valve affecting pressure

Compatibility and cross-reference

Where it fits

Inside the engine of the FM WORLD 4LZ-6.0P, driven by the engine with the pickup in the sump.

Confirming the correct part

Confirm by part number 4G33TC-131000B and the drive and pickup fit.

Reading the old part

Identify the pump by the gear/rotor housing and pickup mounting, and match the drive rather than relying on the tag.

Frequently asked questions

How does the oil pump create pressure?

Its gears or rotors move a fixed amount of oil per revolution into the galleries, and a relief valve limits the maximum pressure.

Why does a worn pump show low pressure at idle?

Worn internal clearances let oil slip back, and the slow-moving pump cannot move enough oil to hold pressure at low speed.

Related parts