Piston Cooling Nozzle 4G33-037000 for FM WORLD 6.0P
This is a piston cooling nozzle for the engine in the FM WORLD 4LZ-6.0P, supplied as an assembly with its fitting, the nozzle body around 100 × 25 × 20 mm and the 28 × Φ20 mm fitting, combined weight about 0.05–0.04 kg. It directs engine oil onto the underside of the piston.
Specifications
| Part number | 4G33-037000 |
|---|---|
| Type | Piston cooling nozzle (oil jet) |
| Nozzle body | 100 × 25 × 20 mm |
| Fitting | 28 × Φ20 mm |
| Weight | 0.05 / 0.04 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | in stock, ready to ship |
What this part does
The nozzle is connected to an oil gallery and turns pressurised oil into a fixed jet aimed at the underside of the piston crown. The flowing oil carries heat away from the crown and the ring belt, and it also lubricates the piston pin and cylinder wall. Because the piston crown is exposed to combustion heat, this cooling jet matters most under heavy load; the nozzle is a simple, fixed part whose position and clear bore do the work.
Cooling nozzle against the main oil feed
The main oil galleries feed the bearings and the valve train. This is a dedicated jet that sprays a small, aimed portion of that oil at the piston, so it is a separate, precisely located part rather than a plain gallery.
Fitting notes
Fit the nozzle and its fitting into the block gallery so the jet is aimed at the piston as shown in the service manual, and confirm it clears the moving piston and rod. Use the seal or fitting specified and do not add sealant that could block the bore.
Before you fit it
Check the nozzle bore is clear and the jet is not bent or carbon-blocked before fitting. A blocked or mis-aimed nozzle leaves the piston uncooled and can cause crown or ring damage without an obvious leak.
Signs this part needs replacing
- Nozzle bore blocked with carbon or debris, stopping the oil jet
- Bent or mis-aimed jet that no longer hits the piston crown
- Loose fitting at the oil gallery
- Piston overheating or ring damage traced to lost cooling oil
Compatibility and cross-reference
Where it fits
Engine block oil gallery of the FM WORLD 4LZ-6.0P, aimed at the piston underside.
Confirming the correct part
Confirm by part number 4G33-037000 and the nozzle position in the block gallery.
Reading the old part
Identify the part by the small aimed jet and its fitting, and check the bore is open rather than relying on the packaging.
Frequently asked questions
What does the piston cooling nozzle spray?
It sprays a fixed jet of engine oil onto the underside of the piston crown to carry heat away and lubricate the pin and liner.
How can a nozzle fail without leaking?
The bore can block with carbon or the jet can bend, so no oil reaches the piston even though the rest of the lubrication system still works.




