High Pressure Tubing Kit 4G33-140000 (380 mm Length, 0.5 kg)
The 4G33-140000 high pressure tubing kit is a 380 mm engine tubing kit weighing 0.5 kg, used to connect the specified fuel-system components.
Tubing kit data
| Part number | 4G33-140000 |
| Component | High pressure tubing kit |
| Length | 380 mm |
| Mass | 0.5 kg |
| System | Engine fuel system |
| Part type | Tubing kit |
Connecting the fuel-system components
The tubing provides a formed route between the specified fuel-system connections, keeping the line aligned and supported in the engine compartment.
Tubing kit and complete engine
This is a tubing kit for a defined connection. The complete engine is a separate major assembly and includes many additional components beyond the lines.
Installing the tubing kit
Route each line using the original clips and avoid bending the fittings during installation. Confirm both ends are clean and aligned before tightening.
After fitting, inspect the full route for contact with hot or moving parts and check the connections for signs of leakage.
Tubing damage and leakage risks
- Bent or kinked tubing
- Damaged end fitting
- Loose clips allowing vibration
- Corrosion or surface cracking
- Leakage at a connection
- Incorrect routing placing the line under stress
What to verify before ordering
Mounting: Fuel-system tubing for the FM WORLD 4LZ-6.0P engine.
Confirmation: Use 4G33-140000 as the order reference and verify the 380 mm length and 0.5 kg mass.
Dimensions to match: Match the formed shape, end fittings, clips and length with the removed tubing kit.
Engine parts
Tubing kit questions
Can a straight tube be bent to replace this kit?
No. The formed shape and fittings must match the engine connection and routing.
What is the main risk of a damaged line?
A bent or poorly sealed line can leak or interfere with nearby engine components.
Identification of 4G33-140000 before ordering
Choose this tubing kit when the specified line is damaged or leaks; inspect fittings and routing before replacing the complete kit.





