,

Valve Lifter (4G33V16-070003)

Valve Lifter (4G33V16-070003). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Valve Lifter 4G33V16-070003 for FM WORLD 6.0P

This is a mechanical valve lifter, also called a tappet, for the engine in the FM WORLD 4LZ-6.0P. It is a cylindrical follower, 15 mm across the upper face, 30 mm across the body, 50 mm tall, weight 0.09 kg, and it sits between the camshaft and the pushrod.

Specifications

Part number4G33V16-070003
TypeMechanical valve lifter (tappet)
Upper diameter15 mm
Body diameter30 mm
Height50 mm
Weight0.09 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

The lifter follows the shape of the cam lobe and converts the lobe’s rise into straight-line movement, passing it through the pushrod to the rocker arm that opens the valve. The 30 mm body slides in a bore in the block, and the smaller upper face locates the pushrod. As a solid mechanical lifter it gives a rigid connection, and the engine keeps a small valve lash to allow the parts to expand as they heat.

Solid lifter against a hydraulic lifter

A hydraulic lifter uses oil pressure to take up the valve clearance automatically. This is a simple solid lifter with no internal oil chamber, so the valve lash is set mechanically and checked against the service manual.

Fitting notes

Fit the lifter into a clean, smooth bore and lubricate it with engine oil, then locate the pushrod squarely on the upper face. Set the valve lash to the value and method given in the service manual after assembly.

Before you fit it

Inspect the cam-facing base and the bore for a worn or pitted face and check the cam lobe while the lifter is out. A worn lifter or lobe will be noisy and should be replaced together.

Signs this part needs replacing

  • Ticking or tapping from the valve train as the face wears
  • A concave or pitted contact face where it rides the lobe
  • Looseness or scoring in the lifter bore
  • Valve lash that will not stay in adjustment

Compatibility and cross-reference

Where it fits

Engine block lifter bore of the FM WORLD 4LZ-6.0P, between the camshaft and the pushrod.

Confirming the correct part

Confirm by part number 4G33V16-070003 and the 30 mm body that fits the lifter bore.

Reading the old part

Measure the body and height and inspect the smooth contact face. The 30 × 50 mm solid lifter identifies the part without a tag.

Frequently asked questions

What does a valve lifter do?

It rides on the cam lobe and transfers the lobe movement to the pushrod and rocker arm to open the valve at the correct time.

How is valve lash handled on this lifter?

It is a solid lifter, so the clearance is set mechanically rather than by oil pressure, using the procedure in the service manual.

Related parts