Unloading Gear Box (W2.5-04H-03-00-00) for the FM WORLD 6.0P
This is the small gear box of the unloading drive, 138 x 125 x 110 mm, with 63.5, 60 and 69 mm bores at its mounting positions, weighing 1.85 kg. It is supplied as a housing with its internal drive, so the meshes and the mounting faces are checked as one assembly.
Specifications
| Part Number | W2.5-04H-03-00-00 |
|---|---|
| Part Type | Unloading gear box |
| Size | 138 x 125 x 110 mm |
| Mounting Bores | 63.5 / 60 / 69 mm |
| Weight | 1.85 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
A gear box assembly fails in two places: the internal teeth, which show the same unloading shock wear as the separate gears, and the mounting bores and faces, which keep the box aligned to the auger. Worn bores let the box move under load, and that movement feeds misalignment back into the mesh faster than any tooth wear. Oil leaks past the seals are usually the first external sign, and metal in the oil is the sign that the internal gears are already shedding material. Because the meshes are set in the factory, a complete box is fitted rather than adjusted on the machine.
The unloading box and the larger threshing gearbox
The threshing gearbox assembly is 185 x 130 x 110 mm and 3 kg; this box is smaller at 138 x 125 x 110 mm with three specific mounting bores. The two are not interchangeable, and the bore pattern identifies the correct box.
Fitting notes
Check the mounting faces and the bores before fitting, and confirm the input and output flanges align with the auger. The seals are inspected and the box filled with the specified oil after fitting, with backlash and alignment following the service manual rather than being adjusted on the bench.
Before you fit it
Inspect the flanges and the seals while the box is out; a box that moves on worn mounts will wear its new internal gears even if the assembly itself is correct.
Signs it needs replacing
- Oil leaks or weeping past the seals
- Metal particles in the gear oil
- Worn mounting bores or movement under load
- Knock or whine confined to the unloading cycle
Compatibility and cross reference
Models covered
The small gear box of the unloading drive on the FM WORLD 4LZ-6.0P, with the 63.5/60/69 mm mounting bores.
Confirming the right part
Confirm W2.5-04H-03-00-00 at 138 x 125 x 110 mm. The larger threshing gearbox is a different assembly.
Reading the old part
Measure the box and the three mounting bores. The bore pattern identifies it even without a readable tag.
Questions we are asked about this part
Is the gear box supplied with its internal gears?
Yes, it is a complete assembly with the meshes set in the factory, which is why it is fitted as a unit rather than stripped and adjusted on the machine.
What does an oil leak from this box mean?
The seals or the mounting faces need checking, and the oil should be inspected for metal. A leak with clean oil is a seal job; metal in the oil points to internal gear wear.





